其實我po文並無對版主表示不滿,畢竟機器硬體跟軟體版本也許有些出入以致可能大家都會有失敗或成功,不過,我很感謝版主提供這麼好的資訊提供大家,只是我試過各版最少3次到4次,是05版OS 跟各版之SYSTEM. img.GZ 共有3各版本,我都刷過,06版OS我也刷過SYSTEM. img.GZ 各3個版本,皆是無限重開機
刷機步驟並不難
1.安裝驅動程式官網載點
2.先至 設定然後把開發人員選項把USB偵錯選項與保持清醒選項，打勾 , 把輸入法固定用英文(美式) 拼音檢查取消
3.再確認版本 在設定的關於平板電腦 倒數三行 資訊
4.基本上05 06版都會顯示05版
5.確認後 下載與正確版本之image.img.gz放於0.56版之解壓縮目錄底下之system_image目錄
6.準備完後最重要一點在SD卡放上OS_Acer_AV051.B1-A71.RV05RC06.TWN.GEN1_A41J_A 或 SD Acer_AV051_B1-A71_1.262.00_TWN_GEN1
檔案 (root失敗時 準備還原用的)
7.我用XP root的;步驟是先到開始->執行-> EX:c:\acer_iconia_b1_toolkit_v0.5.6\toolkit -d
enter 然後按4個enter 等R.......O.......O.......T後就好囉, 對我來說就是無限重開機,哈哈
以下為執行步驟擷取畫面
R:\>toolkit -d
======= Acer Iconia B1-A71 Toolkit v0.5.5 =======
What do you want to do?
[1] Root
[2] Unroot
[3] Internal 2 External (only with root!)
[Q] Quit
Enter a selection: 1
================== Root =================
Before we can start, please do following:
1. Make sure drivers for Acer Iconia B1 are installed, you can find them here: h
ttp://goo.gl/doR8L
2. Plug-In your Acer Iconia B1 into this PC.
3. Enable USB Debugging Mode by going into Settings -> Developer Tools.
4. Put prerooted system.img.gz into folder: system_image.
5. Keep your device plugged in until it's finally rooted, or this procedure is a
borted!
If you sucessfully applied the steps above, we can now start.
You can always abort by pressing Ctrl+C
[ENTER] Continue
[Q] Quit
Enter a selection:
Trying to establish ADB Connection...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
E: Couldn't connect to Acer Iconia B1-A71 over adb. Plug-In the device with USB-
Debugging Mode turned on.
Check if drivers are properly installed.
Press Enter to leave Application...
R:\>toolkit -d
======= Acer Iconia B1-A71 Toolkit v0.5.5 =======
What do you want to do?
[1] Root
[2] Unroot
[3] Internal 2 External (only with root!)
[Q] Quit
Enter a selection: 1
================== Root =================
Before we can start, please do following:
1. Make sure drivers for Acer Iconia B1 are installed, you can find them here: h
ttp://goo.gl/doR8L
2. Plug-In your Acer Iconia B1 into this PC.
3. Enable USB Debugging Mode by going into Settings -> Developer Tools.
4. Put prerooted system.img.gz into folder: system_image.
5. Keep your device plugged in until it's finally rooted, or this procedure is a
borted!
If you sucessfully applied the steps above, we can now start.
You can always abort by pressing Ctrl+C
[ENTER] Continue
[Q] Quit
Enter a selection:
Trying to establish ADB Connection...
List of devices attached
0123456789ABCDEF device
ADB Connection to Acer Iconia B1 successful.
Copying Busybox onto Acer Iconia B1.
3019 KB/s (1062992 bytes in 0.343s)
Successfully copied Busybox onto Acer Iconia B1.
Starting Telnet server on Acer Iconia B1.
Power Manager State:
mIsPowered=true mPowerState=3 mScreenOffTime=3872712 ms
mPartialCount=1
mWakeLockState=SCREEN_ON_BIT
mUserState=SCREEN_BRIGHT_BIT SCREEN_ON_BIT
mPowerState=SCREEN_BRIGHT_BIT SCREEN_ON_BIT
mLocks.gather=SCREEN_ON_BIT
mNextTimeout=2151331527 now=3872709 2147458s from now
mDimScreen=true mStayOnConditions=3 mPreparingForScreenOn=false mSkippedScreen
On=false
mScreenOffReason=0 mUserState=3
mBroadcastQueue={-1,-1,-1}
mBroadcastWhy={0,0,0}
mPokey=0 mPokeAwakeonSet=false
mKeyboardVisible=false mUserActivityAllowed=true
mKeylightDelay=6000 mDimDelay=-1 mScreenOffDelay=2147483647
mPreventScreenOn=false mScreenBrightnessOverride=-1 mButtonBrightnessOverrid
e=-1
mScreenOffTimeoutSetting=-1 mMaximumScreenOffTimeout=2147483647
mLastScreenOnTime=18906
mBroadcastWakeLock=UnsynchronizedWakeLock(mFlags=0x1 mCount=0 mHeld=false)
mStayOnWhilePluggedInScreenDimLock=UnsynchronizedWakeLock(mFlags=0x6 mCount=0
mHeld=true)
mStayOnWhilePluggedInPartialLock=UnsynchronizedWakeLock(mFlags=0x1 mCount=0 mH
eld=true)
mPreventScreenOnPartialLock=UnsynchronizedWakeLock(mFlags=0x1 mCount=0 mHeld=f
alse)
mProximityPartialLock=UnsynchronizedWakeLock(mFlags=0x1 mCount=0 mHeld=false)
mProximityWakeLockCount=0
mProximitySensorEnabled=false
mProximitySensorActive=false
mProximityPendingValue=-1
mLastProximityEventTime=0
mLightSensorEnabled=false mLightSensorAdjustSetting=0.0
mLightSensorValue=-1.0 mLightSensorPendingValue=-1.0
mHighestLightSensorValue=-1 mWaitingForFirstLightSensor=false
mLightSensorPendingDecrease=false mLightSensorPendingIncrease=false
mLightSensorScreenBrightness=-1 mLightSensorScreenBrightnessWait=-1 mLightSens
orButtonBrightness=-1 mLightSensorKeyboardBrightness=-1
mUseSoftwareAutoBrightness=false
mAutoBrightessEnabled=false
mScreenBrightnessAnimator:
animating: start:255, end:255, duration:0, current:255
startSensorValue:-1 endSensorValue:-1
startTimeMillis:26806 now:3872717
currentMask:SCREEN_BRIGHT_BIT
mLocks.size=2:
SCREEN_DIM_WAKE_LOCK 'StayOnWhilePluggedIn Screen Dim' activated (mi
nState=1, uid=1000, pid=340 total=30843ms)
PARTIAL_WAKE_LOCK 'StayOnWhilePluggedIn Partial' activated (minSt
ate=0, uid=1000, pid=340 total=30843ms)
mPokeLocks.size=0:
Don't touch the screen! I'm taking it over now ;-)
Starting: Intent { act=android.intent.action.MAIN cat=[android.intent.category.L
AUNCHER] cmp=com.mediatek.connectivity/.CdsInfoActivity }
Checking, if telnet server is started. If the tool crashes now, try to start tel
net server manually by clicking on 'Run'.
system 2852 1 1196 104 ffffffff 00000000 S /data/local/tmp/busybox
Successfully started Telnet server on Acer Iconia B1.
/data/local/tmp/busybox telnet 127.0.0.1 1234 | cat /proc/dumchar_info
exit
exit
127.0.0.1 1234 | cat /proc/dumchar_info <
Part_Name Size StartAddr Type MapTo
preloader 0x0000000000040000 0x0000000000000000 2 /dev/misc-sd
dsp_bl 0x00000000005c0000 0x0000000000040000 2 /dev/misc-sd
mbr 0x0000000000004000 0x0000000000000000 2 /dev/block/mmcblk0
ebr1 0x0000000000004000 0x0000000000004000 2 /dev/block/mmcblk0p1
pmt 0x0000000000400000 0x0000000000008000 2 /dev/block/mmcblk0
nvram 0x0000000000500000 0x0000000000408000 2 /dev/block/mmcblk0
seccfg 0x0000000000020000 0x0000000000908000 2 /dev/block/mmcblk0
uboot 0x0000000000060000 0x0000000000928000 2 /dev/block/mmcblk0
bootimg 0x0000000000600000 0x0000000000988000 2 /dev/block/mmcblk0
recovery 0x0000000000600000 0x0000000000f88000 2 /dev/block/mmcblk0
sec_ro 0x0000000000600000 0x0000000001588000 2 /dev/block/mmcblk0p2
misc 0x0000000000060000 0x0000000001b88000 2 /dev/block/mmcblk0
logo 0x0000000000300000 0x0000000001be8000 2 /dev/block/mmcblk0
expdb 0x0000000000200000 0x0000000001ee8000 2 /dev/block/mmcblk0
android 0x0000000026500000 0x00000000020e8000 2 /dev/block/mmcblk0p3
Checking firmware version.
283 KB/s (4543 bytes in 0.015s)
Successfully pulled build.prop.
Firmware version 'RV05RC05_TWN_GEN1
' installed. MAKE SURE YOUR system.img.gz IN system_image FOLDER IS OF THE SAME
VERSION, OTHERWISE YOU GET A BOOTLOOP!
Copying rooted system.img.gz onto Acer Iconia B1 (This will take 1-2 minutes)...
[ENTER] Continue
[Q] Quit
Enter a selection:
system.img.gz found in folder 'system_image'.
/data/local/tmp/busybox telnet 127.0.0.1 1234
chmod 777 /cache
chmod 777 /cache/system.img.gz
shell@android:/ $ /data/local/tmp/busybox telnet 127.0.0.1 1234
Entering character mode
Escape character is '^]'.
chmod 777 /cache
chmod 777 /cache/system.img.gz
system@android:/ $ chmod 777 /cache
system@android:/ $ chmod 777 /cache/system.img.gz
Unable to chmod /cache/system.img.gz: No such file or directory
10|system@android:/ $ exit
Connection closed by foreign host
1|shell@android:/ $ 2943 KB/s (368395786 bytes in 122.234s)
lost+found
recovery
system.img.gz
Successfully copied system.img.gz to /cache
Wrting rooted system.img.gz. This is going to take 2 minutes.
IN -ANY- CASE, DON'T INTERRUPT THIS PROCESS, OR YOUR DEVICE COULD BE -BRICKED-
[ENTER] Continue
[Q] Quit
Enter a selection:
/data/local/tmp/busybox telnet 127.0.0.1 1234
/data/local/tmp/busybox zcat /cache/system.img.gz | dd of=/dev/block/mmcblk0 bs=
4096 seek=8424 count=156928
shell@android:/ $ /data/local/tmp/busybox telnet 127.0.0.1 1234
Entering character mode
Escape character is '^]'.
/data/local/tmp/busybox zcat /cache/system.img.gz | dd of=/dev/block/mmcblk0 bs=
4096 seek=8424 count=156928
cache/system.img.gz | dd of=/dev/block/mmcblk0 bs=4096 seek=8424 count=156928 <
R...................O.........156928+0 records in
156928+0 records out
642777088 bytes transferred in 59.885 secs (10733524 bytes/sec)
system@android:/ $ ..........O..................T
Traceback (most recent call last):
File "<string>", line 1317, in <module>
File "<string>", line 98, in main
File "<string>", line 711, in root
File "<string>", line 752, in write_system_image
AttributeError: 'NoneType' object has no attribute 'flush'
exit
Connection closed by foreign host
1|shell@android:/ $
R:\>
|
[複製連結]
263810| 341| 9
鑽石
碎鑽
金豆
樓主
