lconia B1-a71 root 方法

======= Acer Iconia B1-A71 Toolkit v0.5.5 =======

What do you want to do?
[1] Root
[2] Unroot
[3] Internal 2 External (only with root!)
[Q] Quit

Enter a selection: 1

================== Root =================
Before we can start, please do following:
1. Make sure drivers for Acer Iconia B1 are installed, you can find them here: h
ttp://goo.gl/doR8L
2. Plug-In your Acer Iconia B1 into this PC.
3. Enable USB Debugging Mode by going into Settings -> Developer Tools.
4. Put prerooted system.img.gz into folder: system_image.
5. Keep your device plugged in until it's finally rooted, or this procedure is a
borted!

If you sucessfully applied the steps above, we can now start.
You can always abort by pressing Ctrl+C


[ENTER] Continue
[Q]     Quit

Enter a selection:

Trying to establish ADB Connection...
E：Couldn' t connct to Acer Iconia B1-A71 over adb. Plug-In device with USB-
Debugging Mode turned on.
Check if drivers are properly installed.

If  you keep getting this error, try to run toolkit with -d or --debug parameter
Press Enter to leave Application...

驅動程式安裝成功了，但依然如此...

======= Acer Iconia B1-A71 Toolkit v0.5.5 =======

What do you want to do?
[1] Root
[2] Unroot
[3] Internal 2 External (only with root!)
[Q] Quit

Enter a selection: 1

================== Root =================
Before we can start, please do following:
1. Make sure drivers for Acer Iconia B1 are installed, you can find them here: h
ttp://goo.gl/doR8L
2. Plug-In your Acer Iconia B1 into this PC.
3. Enable USB Debugging Mode by going into Settings -> Developer Tools.
4. Put prerooted system.img.gz into folder: system_image.
5. Keep your device plugged in until it's finally rooted, or this procedure is a
borted!

If you sucessfully applied the steps above, we can now start.
You can always abort by pressing Ctrl+C


[ENTER] Continue
[Q]     Quit

Enter a selection:

Trying to establish ADB Connection...
E：Couldn' t connct to Acer Iconia B1-A71 over adb. Plug-In device with USB-
Debugging Mode turned on.
Check if drivers are properly installed.

If  you keep getting this error, try to run toolkit with -d or --debug parameter
Press Enter to leave Application...

驅動程式安裝成功了，但依然如此...

現在插著平板一運行就跳掉，拔掉就說沒連接～
難道我的電腦不能用嗎?

求救啊...驅動安裝完後成是一運行就跳出...
搞啥，好不容易安裝好驅動，結果第一個繼續按下續跑一下就退出！
冏爆了啦

現在終於跑的動了...但到輸入指令那一步又...
他輸入完會自動按RUN，但按下去程式就跳掉了...
所以還是沒成功 =  ="

不知道為何一直這樣子 跟上面大大一樣問題 偵錯開了 驅動裝了
此題還是無法解決=ˇ=

小弟找很久終於在這邊找到了
謝謝分享

不好意思，剛開始接觸Android平板，問個小白問題？
ROOT後有啥好處或提升？

684351279 發表於 2013-5-19 00:55

                               
登錄/註冊後可看大圖

不知道為何一直這樣子 跟上面大大一樣問題 偵錯開了 驅動裝了
此題還是無法解決=ˇ= ...

筆者猜測因該是輸入法的問題
請將預設輸入法改為英文(美式)

system.img這個檔也一起下載下來
把這個檔複制到root程式的system_image的檔案夾裡
請問這兩句是什麼意思??
目前已經無限重起三次=ˇ=

684351279 發表於 2013-5-19 23:45

                               
登錄/註冊後可看大圖

system.img這個檔也一起下載下來
把這個檔複制到root程式的system_image的檔案夾裡
請問這兩句是什麼意思?? ...

請去XDA網站內下載System.gz檔
依照您平版版本號碼RV05RC05_TWN下載RV05RC05的System.gz檔、RV05RC06_TWN下載RV05RC06的System.gz檔