Android 台灣中文網

打印 上一主題 下一主題

[分享] 你的TF201扔了嗎-2(6.0.1)

[複製連結] 查看: 75304|回覆: 15|好評: 0
跳轉到指定樓層
jlwjay | 收聽TA | 只看該作者 回帖獎勵 |正序瀏覽 |閱讀模式
發表於 2016-9-30 23:15

馬上加入Android 台灣中文網,立即免費下載應用遊戲。

您需要 登錄 才可以下載或查看,沒有帳號?註冊

x
本帖最後由 jlwjay 於 2016-10-3 15:05 編輯

這幾天整理抽屜,看到我的201躺在那一動也不動,大概一年的時間沒有動了....自從上次分享過4.4.4的刷法後
我想這台機器大概也沒用了,但是這就是android開放系統厲害的地方
XDA上竟然出現TF201刷上最新的android 7.0...真是嚇死我了
但我今天要分享的不是7.0而是6.0.1因為7.0剛上其實不是太穩
等作者多改幾版我肯定會再刷的~!
我一開始以為很簡單的刷法,刷上最新的tf201 recovery
然後再刷ROM刷ROOT搞定~

但我錯了!!!老實說我甚至以為被我弄成磚了
這次的步驟真的非常不一樣,可能要幾個小時才能搞定
但是!是值得的!!!!!!
原本原廠的系統是android 4.1.1
FB已經幾乎不能跑了,頂多只能看看影片
其他該有的功能等等全都不能用了,
我已經打算打碎然後扔回收了,這作者真的救了這台機器阿!

廢話不多說~來吧!
android 6.0.1 & 順便分享7.0~以後更新應該也是在這帖

這是原作者的文章~

事情準備
1.SD卡
2.twrp 3.0.2-0
3.Bootloader+recovery刷包
4.RECOVERY刷包(請注意這兩個是不同的)
5.6.0.1 ROM
6.supersu 一定要這版
7.GAPPS 點擊就下載嘍~注意

安裝步驟說明:
由於這需要更新Bootloader至4.2.X這樣
所以已經不是原本官方的ROM刷回去就能回原廠
這次安裝步驟我弄了好幾次都整個黑掉
最後才搞定,所以真的要好好弄!

上面的檔案都下載好後都需要放在SD卡
有一點比較不同的地方是,twrp3.0.2-0這個東西
需要用電腦刷進去就是需要刷機包那種東西
放在電腦裡然後平版接電腦
開機畫面進入Bootloader然後用音量鍵選擇連接電腦

我現在說的是原本android4.X以前的版本
因為更新Bootloader後,我就不知道怎麼連接電腦了
之後全都要用twrp用刷入的方法改版之類的

那麼~就來吧~~~~~
首先平版要刷twrp3.0.2-0但要先將檔名改名成"recovery.img"
刷入指令就像一般手機那樣叫出CMD
然後輸入字串~

Code:
cd C:你的刷機資料夾

Code:
fastboot -i 0x0B05 flash recovery recovery.img

Code:
fastboot -i 0x0B05 reboot

輸入完這個REBOOT字串,按下ENTER後
手直接按著音量鍵減
避免重開機進入系統浪費時間
然後直接進入TWRP,不要管作業系統了
因為也用不到了!


然後刷入Bootloader+recovery刷包這個!
刷好按重開機
接著會看到開機畫面藍條刷入的過程之後會重開機
這時候Bootloader已經更新完成了!
我的經驗是會直接進入一隻老虎的twrp版本
這不要管他,進入後一樣直接再刷RECOVERY刷包
版本是twrp2.8.5.X的版本,這是更新TWRP的動作
接著再重開機直接按音量鍵減進入RCA這個
這時候已經不能連接電腦用刷的了~一切都得靠twrp嘍~
換言之~如果在這之前有官方的ROM,都還可以直接刷回去!
之後再來就回不去了!注意~~~

到這邊為止~都只是基本刷機~有經驗的人應該非常容易就可以到這一步
大概十幾分鐘到半小時左右~

重頭戲~不管是android5.1 or 6.0.1 or 7.0.0之後的ROM
全部都要更換內建SD卡格式!!
不然直接刷的話,可以刷ROM但是無法安裝APP
我刷了好幾次好幾個版本,都能進去系統,
但是就是無法安裝APP
想發問問原作者,但爬文看到有人問相同問題
完全沒人回應....於是我就再仔細看作者的文章內容
裡面有一段寫著
"This ROM is for TF201 and F2FS only"
我一直在想F2FS是啥,然後搞了半天不會用
原來作者直接有教....
那就直接由我轉述了~~~

進入TWRP-->選擇WIPE
然後選右邊format data然後輸入YES
請注意電源一定要滿的!因為這個過程需要70分鐘左右
我是直接差著電源啦~
如果過程沒電~就掰掰了~~~

跑了多久我不是很確定,因為辦事回來大概兩個小時後了
接著直接操作不用重開機了
重點來了!!!
選擇WIPE-->Advanced Wipe-->點左邊Data打勾
然後點右邊Repair or Change File System-->選擇F2FS
然後滑動變更~~~搞定!

再來就是正常刷ROM的程序了~~
先wipe選擇上面五個即
dalvik cache, system, cache, data, internal storage
跑完後,刷6.0.1 ROM
接著刷GAPPS 點擊就下載嘍~注意
最後刷supersu 一定要這版

完成~~~重開機大概五分鐘左右吧~
就可以看到開機動畫了~~~

成功之後就可以安裝APP~享受新系統了!
「用Android 就來APK.TW」,快來加入粉絲吧!
Android 台灣中文網(APK.TW)

評分

參與人數 1碎鑽 +1 幫助 +1 收起 理由
skysonpan + 1 + 1 讚一個!

查看全部評分

收藏收藏3 分享分享 分享專題
用Android 就來Android 台灣中文網(https://apk.tw)
回覆

使用道具 舉報

15
exia4625 | 收聽TA | 只看該作者
發表於 2020-8-28 13:48
jlwjay 發表於 2020-8-25 21:43
關鍵字:UnLock_Device_App_V7.apk
你是用這個APP解鎖嗎?

大大,我有安裝V6版跟V7版的是一樣顯示錯誤
用Android 就來Android 台灣中文網(https://apk.tw)
回覆 支持 反對

使用道具 舉報

14
 樓主| jlwjay | 收聽TA | 只看該作者
發表於 2020-8-25 21:43
exia4625 發表於 2020-8-23 22:44
請問  …現在TF201還能解鎖嗎…官解apk解鎖不了…會出現"發生未知的錯誤,可能是網路連線問題"……有沒有其 ...

關鍵字:UnLock_Device_App_V7.apk
你是用這個APP解鎖嗎?

給你參考
https://apk.tw/thread-248140-1-1.html

回原廠
https://www.mobile01.com/topicdetail.php?f=605&t=2596348&last=40129154
用Android 就來Android 台灣中文網(https://apk.tw)
回覆 支持 反對

使用道具 舉報

13
exia4625 | 收聽TA | 只看該作者
發表於 2020-8-23 22:44
由 手機網頁 發佈
請問  …現在TF201還能解鎖嗎…官解apk解鎖不了…會出現"發生未知的錯誤,可能是網路連線問題"……有沒有其它方式可以解鎖…
用Android 就來Android 台灣中文網(https://apk.tw)
回覆 支持 反對

使用道具 舉報

12
carlkyo | 收聽TA | 只看該作者
發表於 2020-4-10 21:38
我那部TF201開不了機了
按開機只是閃了一下橙燈
用Android 就來Android 台灣中文網(https://apk.tw)
回覆 支持 反對

使用道具 舉報

11
shamushuang | 收聽TA | 只看該作者
發表於 2019-10-1 08:16
我還按照XDA大神版主的做法完成的以下是步驟,刷6.0真的比原來4.1順一些

Asus Transformer Prime TF201 ROM update
Configuration @ start
•        Transformer Prime TF201
•        Android 4.1.1 (JB; Nvidia logo on bottom right @ boot <> under Asus logo)
•        GPS 7.9.13
•        Wi-Fi 7.1.0.24
•        BT 10.33
•        Camera FT201-0x9900
•        Screen MXT-2.0 build-170
•        Kernel 3.1.10.00002-9599d0cf android@Mercury
o        #1 SMP PREEMPT Thui Nov 22:12:01 CST 2012
•        Build nr JR003C.WW_epad-10.4.2.18-20121122
•        Pad EC TF201-PAD-0215
•        Mobile Dock TF201-DOCK-0207
1.        Unlock bootloader
•        http://www.asus.com/Tablets/Eee_Pad_Transformer_Prime_TF201/HelpDesk_Download/, OS»Android, Utilities, Unlock Device App V6 (states “only for ICS”, however also Works with JB)
•        DL APP to tablet; direct link= http://dlcdnet.asus.com/pub/ASUS/EeePAD/TF201/UnLock_Device_App_V6.apk
•        Run the built in file explorer on tablet and browse to the downloaded file
•        Tap the Unlock APK to install
•        Run the unlocker and follow directions; you’ll get several warnings
•        The unlock will take a few minutes, reboot and on the top left corner say “Unlocking Device”. When done it will say “Device Unlocked”
•        ! If you fail to authenticate to GOOGLE then ENABLE "Disable access for less secure apps" setting in the "Google Security page" that thinks this APP is suspicious. Go > https://security.google.com/settings/security/activity >
ENABLE "Disable access for less secure apps"
2.        Root
•        Prepare tablet
•        go to setting, under system click on "developer options" and enable "usb debugging". If you don’t have a "developer options" click on "about tablet", and click 7 times on "build number" until it says "congratulations now you are a developer". Now you should see the "developer options on the left, right above "about tablet" (then enable usb debugging
•        under "personal" click tab "security" and enable "unknown sources"
•        DISABLE ANTI-VIRUS
•        connect tablet to laptop/pc (Windows 7 loads all drivers)
•        download motochopper: http://www.mediafire.com/?f4lipgd1hh3jug2 and extract
•        run the file that says "run.bat" as administrator and follow steps on the screen
•        if all goes well, your device should be rooted and you should have supersu installed. You can check it with ‘Root Checker’ app from Gooogle Play.

3.        Upgrade bootloader (from stock 10.4.2.18) and flash recovery

Prerequisites
o        Fully charged tablet plugged into your computer
o        USB Debugging enabled under Developer Options (Note: This may be listed as ADB Debugging on some ROM"s)
o        necessary drivers installed and computer is recognizing tablet
o        a ‘install directory’, i.e. C:TP,  to put in all files below

•        DL the Minimal ADB and Fastboot setup.exe to PC from here https://drive.google.com/file/d/0B1S0LCuXCnnmOWhnUk1ZWVdQakE/view?usp=sharing&pli=1 MD5=813C54CDF3B461CD485E23F327ADF725
•        Follow the Installers instructions and select ‘install directory’ (geen subdir!!!)
•        Run Minimal ADB and Fastboot; you see a command window where you can issue ADB and Fastboot commands to your device
•        For more information on issuing commands to your device using ADB and Fastboot: this guide on ADB and this guide on Fastboot.

•        DL “upgrade_tf201_to_tf300t.zip” from download section at the top of every page of the thread: http://forum.xda-developers.com/devdb/project/dl/?id=6853
•        Extract to ‘install directory’
•        TWRP for a 201 = twrp_tf201t.blob
•        TWRP for the 300 = twrp_tf300t.blob
•        HairyBean BL & TWRP (flashable zip) to turn your 201 into a 300

•        DL custom recovery (TWRP 2.8.3.0): http://techerrata.com/file/twrp2/tf300t/openrecovery-twrp-2.8.3.0-tf300t.blob and rename it to twrp.blob

•        DL ROM KatKiss-5.1_TF201_022_Lite.zip https://yadi.sk/d/u0ETr_T-fwgxh

•        DL SuperSu http://forum.xda-developers.com/atta...5&d=1427883426

•        DL Gapps https://www.androidfilehost.com/?fid=95916177934550851

Upgrade bootloader using fastboot
•        Power your tablet off and with the [ VOL DOWN & POWER ] buttons boot the tablet into the bootloader
•        Once there push [ VOL DOWN ] untill the green box is on the USB ICON, then push [ VOL UP ] to select fastboot
•        Make sure your PC can see your tablet by entering this command in DOS window
fastboot devices
You should see serial number of attached device, followed by “fastboot”.

•        Now type this command
fastboot -i 0x0b05 flash recovery twrp_tf201t.blob

•        Then
fastboot -i 0x0b05 reboot-bootloader
•        Push [ VOL UP ] ON RCK to enter recovery

•        Once in TWRP check to see if adb is working...
adb devices
You should see “012345678ABCDEF         recovery”

•        Now push the HairyBean BL onto the tablet
adb push HairyBean_Bootloader_TWRP2.5.zip /sdcard

•        Select the install tab in TWRP, search the folder and flash it....
•        reboot once it has finished. If asked to install SuperUser say NO..........
•        A blue bar will go accross the screen on the tab and the command prompt will indicate it was successful in about 10 seconds
•        LET THE BLUE BAR FILL !!!!!!! Once finished it will reboot into Hairybean TWRP

•        Once booted into recovery, run this command to boot into fastboot
adb reboot-bootloader
You will see that the USB icon is missing now, this is good... If you still see the USB icon DON"T go to the next step
Flash recovery
•        Flash TWRP recovery (leave tablet in boot screen)
fastboot -i 0x0b05 flash recovery twrp.blob

•        Once that has finished reboot into bootloader (leave tablet in boot screen)
fastboot -i 0x0b05 reboot-bootloader

•        Now enter recovery by pushing [ VOL UP ] ON RCK....
•        Make sure TWRP is version 2.8.3.0
•        Go to Wipe////Format Data////Type yes
•        it can take up to 90 mins to format; DO NOT INTERRUPT THE FORMAT !!!!!!!
•        After it"s done, go and change /data to f2fs; DO NOT change /system and /cache partitions to F2FS
o        Go to Wipe////Advanced Wipe////Select Data
o        Tap “Repair or Change File System”////”Change File System////F2FS
o        Swipe to Change
4.        Install new ROM
•        Copy (with Explorer) KatKiss-5.1_TF201_022_Lite.zip+UPDATE-SuperSU-v2.40.zip+ gapps-5.1.x-20150404-minimal-edition-signed.zip to root of microSD
•        Go to Wipe////Advanced Wipe////Select Dalvik Cache+System+Cache+Internal Storage
•        Swipe to Wipe

•        Select the install tab in TWRP, change to microSD, select KatKiss-5.1_TF201_022_Lite.zip and flash it....
•        Flash UPDATE-SuperSU-v2.40.zip
•        Flash gapps-5.1.x-20150404-minimal-edition-signed.zip
•        Clean Dalvik Cache and cache
•        REBOOT into android, first boot can take up to 15 minutes
#
用Android 就來Android 台灣中文網(https://apk.tw)
回覆 支持 反對

使用道具 舉報

10
 樓主| jlwjay | 收聽TA | 只看該作者
發表於 2019-3-17 11:04
wang4657 發表於 2019-3-16 12:25
請問可以從原廠4.1開始刷rom嗎?

正常來說就是從原廠4.1.1,也就是最後一個原廠更新開始刷起~建議你到XDA研究最新的更新~
用Android 就來Android 台灣中文網(https://apk.tw)
回覆 支持 反對

使用道具 舉報

9
wang4657 | 收聽TA | 只看該作者
發表於 2019-3-16 12:25
請問可以從原廠4.1開始刷rom嗎?
用Android 就來Android 台灣中文網(https://apk.tw)
回覆 支持 反對

使用道具 舉報

8
eighten | 收聽TA | 只看該作者
發表於 2018-12-6 13:29
用Android 就來Android 台灣中文網(https://apk.tw)
回覆 支持 反對

使用道具 舉報

7
komo6060 | 收聽TA | 只看該作者
發表於 2018-3-30 03:11
樓主 可以問問還有GAPPS檔案的載點嗎?
用Android 就來Android 台灣中文網(https://apk.tw)
回覆 支持 反對

使用道具 舉報

6
delete1987s | 收聽TA | 只看該作者
發表於 2017-1-19 11:20
解決了。用自帶瀏覽器下載的APK會出現解包問題,裝個ES文件管理器就搞定了。發現升級6.0速度快了不少啊,TF201可以不用繼續墊桌角了。
用Android 就來Android 台灣中文網(https://apk.tw)
回覆 支持 反對

使用道具 舉報

您需要登錄後才可以回帖 登錄 | 註冊

本版積分規則