(SIYAH接班人)Googy-Max Kernel 1.5.9 (Linux 3.0.87 / Linaro GCC 4.7.4)

前幾天看倒這我也傻了...
曾風靡全世的S3 KERNEL SIYAH...
它停止開發S3的相關內核了...
更新到1.9.1!
不過慶幸的是有人接班...
我還沒刷過= =""
等等來去刷

新作者講的
- Based on Siyah Kernel 1.9.1 Sources(延續SIYAHV1.9.1....)
- Dual-booting. You can have Samsung JB and CM10.1 ROMs on a single device at the same time
- Updated to latest ramdisk
- Patched to Samsung Sources Update10
- Linux version 3.0.87
- Compiled with linaro gcc 4.7.4 2013-06
- Wireless hotspot working on sammy & cm
- SELinux support
- ZRAM (LZ4 compression) activated and configurable in STweaks (On/Off (On default) - Zram disksize (300MB default / 2GB Max) - Swappiness(80% default) )
- CPU OC/UC/UV
- GPU OC/UC/UV
- Adaptive Body Bias control
- Audio enhancement and sound boosting for great headphone experience (ScoobyDoo Sound Engine 1.1 )
- Governors : Pegasusq / Zzmoove 0.6 / Lulzactiveq [default] / Ondemand (Configurable via STweaks )
- Improved cpu hotplugging mechanism
- I/O Schedulers : Deadline - cfq[default] - bfq - noop - row - sio - vr
- Dynamic FSync - Configurable via Stweaks
- init.d support
- Increased values for SD ReadAhead - Configurable via Stweaks
- Auto-root
- Kernel based gestures support by Tungstwenty
- NTFS automounting for USB sticks, mounted to /mnt/ntfs folder in Read Only mode
- ExFAT support
- mDNIe negative effect toggle with 4 consecutive press of home button
- mDNIe values can be adjusted using the interfaces in /sys/class/misc/mdnie
- Higher charging rates for AC & USB chargers (Fast Charge) [Adjustable to Max 1500mA]
- CRT-OFF support (Early Suspend) [Adjustable]
- TriangleAway support
- Almost everything is configurable via simple and free STweaks (included in the kernel)
- slide2wake (incomplete)
- Touch-to-Wake configurable via STweaks
- Xbox controller support
載點
點我進入DROBOX
6/27更新1.6.0請看3樓!

有人會設定這內和嗎??
只有百分之60跟SIYAH的相同~
其餘...
我剛試了一下
CPU只能抄到1.6G
GPU一樣700MHZ
螢幕RBG全部手動!
支持ZRAM!

不過一看到1.6G心就涼了= =""
而且設定比SIYAH還複雜~~
就等神大研究出吧
我自己發文又在這發問XD

- ZRAM (LZ4 compression) activated and configurable in STweaks (On/Off (On default) - Zram disksize (300MB default / 2GB Max) - Swappiness(80% default) )
- CPU OC/UC/UV
- GPU OC/UC/UV
- NTFS automounting for USB sticks, mounted to /mnt/ntfs folder in Read Only mode
- ExFAT support

======================
上述幾款功能我還蠻有興趣的，先收藏這帖子，等我資料備份好了再來刷

7/26更新1.6.0
- Schedulers : Removed bfq
- Removed SELinux (too much troubles)
- Dynamic Fsync updated to 1.2 and activated by default
- Stweaks : Added Dynamic Fsync switch to misc tab
- Stweaks : Raised max value of ZZMoove sampling rate
- Fixed 2nd rom utils problems with Dynamic Fsync
- Smoothness restored
- ExFat support fixed
- Touchwake 1.1a
點我下載