S3 核心基頻選擇包 更新第6版 (2013-01-13)

yuchen1681 發表於 2013-3-2 20:16

                               
登錄/註冊後可看大圖

大大提供的檔案~~小弟不會用呀~~解壓後一堆資料夾
拜託!!教一下~

你確定你有爬文嗎??
版大發了好幾篇教學文,你有看過嗎??

Boeffla-Kernel 2.8 正式版 釋出
http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/summary/7/344

Note: This kernel is only for Samsung based Jelly Bean (Android 4.1.x) roms!!! Do not install it on CM or AOSP based roms!!! And do not install on latest Samsung 4.2 leaks !!!

Features:

* Soft CPU overclocking to 1500 or 1600 MHz
* Governor profiles for pegasusq and zzmoove for performance, battery saving etc.
* GPU overclocking up to 700 MHz
* GPU undervolting / overvolting
* Boeffla-Tweaks app to configure most important kernel features via easy user interface (many features added with kernel 2.8)
* Configuration file for easy configuration of kernel without additional apps for many options
* Compatibility to common standard apps (Voltage Control, SetCPU, System tuner etc.)
* Boeffla-Sound engine V1.6.0 to unleash the power of the Galaxy S3 audio chip (latest new functionalities: speaker tuning, intelligent microphone sensitivity setting for both recording and call, call-detection, stereo expansion, mono downmix)
* Full configuration of Boeffla-Sound engine via Boeffla-Sound app from Google playstore possible
* Custom equalizer support via configuration file possible
* LED fading can be enabled (for a demonstration video CLICK HERE - thanks to Andreas61 for recording the video) - Note: It does only work for non-Samsung apps (does not work for missed calls, stock sms etc!)
* Increase brightness of notification LED for both blinking or fading
* Exynos vulnerability fixed
* Sudden death issue supposed to be fixed
* Custom boot animation support
* CRT-OFF animation supported
* CPU undervolting interface
* Adjustable charger rate, defaults increased to 1100 mA for ac (usb stays on 475 mA per default) - you can now set USB charge down to zero, so it does not load when you plug it into your PC to just transfer files etc.
* Hardcore speedmod sharpness fix implemented (default is off, you have to enable it in the config file)
* Touch boost switchable (default is on)
* Black crush fix for better balanced display
* SD card read ahead buffer increased to 256kb (can be disabled)
* Ext4 File system tweaks (can be disabled)
* System Tweaks (Boeffla-Kernel tweaks is default, can be disabled or switched to Speedmod tweaks)
* SIO scheduler (with slight tweaks)
* ROW scheduler
* BFQ scheduler (version v5r1)
* ZZmoove 0.3 governor (focus on battery performance)
* LulzactiveQ governor included (tweaked)
* Dynamic fsync implemented
* Timeouts for external SD card changed to improve handling of crappy cards
* Proportional rate reduction TCP implemented
* Entropy generator for random data fixed
* Car dock support
* Swap support
* init.d support (automatic folder creation and permissions setting)
* CIFS compiled as a module (load module from /lib/modues if required)
* NFS compiled as a module (load module from /lib/modues if required)
* Auto Root (disabled by default)
* exFat supported
* Triangle away supported
* Automatic EFS backup to external (priority) or internal SD Card (fallback)
* Kernel initialisation log file (with history of 3 log files)
* Disabled Android logger (can be enabled again)
* Disabled Kernel logging (can be enabled again)
* Disabled various debug logs and traces
* Compiled with stock ARM toolchain
* Internal kernel busybox version 1.20.2
* Ramdisk from XXELLA firmware
* Source code base is GT-I9300_JB_Opensource_Update7

aus 發表於 2013-3-2 20:26

                               
登錄/註冊後可看大圖

你確定你有爬文嗎??
版大發了好幾篇教學文,你有看過嗎??

哈!!感謝大大~~突然間我就入成功了~~原來是要開起手機裡CWM的程式(已ROOT)，再載入檔案.ZIP
但~~~刷完後~~介面好像還是一樣
還在測試中

先說聲~~謝謝啦

yuchen1681 發表於 2013-3-3 10:21

                               
登錄/註冊後可看大圖

哈!!感謝大大~~突然間我就入成功了~~原來是要開起手機裡CWM的程式(已ROOT)，再載入檔案.ZIP
但~~~刷完後~ ...

這篇教學 給你參考一下吧
http://dingdingc.blogspot.tw/2012/12/galaxy-s-iii-boeffla-kernel.html

PhilZ Touch 4.87 釋出
http://www.mediafire.com/?p1er6etx7unk3b2

http://forum.xda-developers.com/showthread.php?t=2002953

New in PhilZ Touch v4.87

v4.63 ---> 4.64
fix: when disabled, virtual keys would still show for a fraction of a second on start

v4.64 ---> 4.87
Backup and Restore:

    menu Custom Backup and Restore can now be accessed in main Backup and Restore menu
    support restore backups from /sdcard/0 (Android 4.2) in custom jobs and TWRP mode
    add support to sd-ext ext4 partition on external storage
    menu to delete custom and TWRP backup images
    auto-reboot option for custom backup and restore jobs
    set .android_secure path in custom jobs
    smart auto detect android_secure for stock CWM backup and restore operations
    fix preload was selectable in TWRP jobs (even if would not actually be processed)
    progress bar is no more overwritten by text
    time and battery stats are shown and refreshed during nandroid operations
    on successful or cancelled nandroid jobs, user background icon is restored
    on cancelled nandroid jobs, progress bar is correctly reset and user background icon is restored


User configurable gesture actions

    gestures: double tap, long press/move, long press/lift, slide left, slide right
    always vibrate on long press/move action validation
    actions: show log, change brightness, blank screen, capture screen shot, launch Aroma File Manager


GUI

    default black theme without background icon
    toggle clock and battery on top
    header title will be auto-shortened to not overwrite battery and clock on lower res devices
    battery and clock will truly refresh indications every 15 sec
    user configurable dim screen timer
    user configurable turn-off screen timer
    manually adjust brightness (stock kernel doesn't support lower than 65, but recovery binary will accept 25 on custom kernels)
    when double tap mode is selected, you now really need to double tap the same menu to validate it
    menu Set Time Zone moved to GUI settings
    fix Moscow UTC time


Misc

    add support to sd-ext ext4 partition on external storage
    Move Clean before instal new ROM menu to Wipe Data/Factory Reset menu
    fix /system was left again mounted after start up and showing log

Boeffla-Kernel 2.9 beta1 釋出
http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/summary/4/346

2.9-beta1

Change Log (vs last stable 2.8)

    Completely created from scratch based on latest Samsung source code drop Update8
    Ramdisk updated to latest version
    SuperSu updated to latest version 1.25
    All functionalities of lastest stable 2.8 contained
    exFat is working as well now


Boeffla-Kernel 2.9-beta1 更新內容

    更新Samsung Update8最新資源
    Ramdisk最新資源
    SuperSu更新至1.25
    完整移植2.8穩定版所有功能
    exFat格式確定正常支援

收下N次回復N次

感謝~但我還是要回覆灌水賺碎鑽才能再次收下~
我盡然被一個新版主抓幾百年前回覆文章說灌水~
APK都快沒人了還這樣玩~XD~
別這們高調怕人不知道你變版主~謝謝~

Boeffla-Kernel 2.9 beta2a 釋出
http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/summary/4/348

2.9-beta2

Change Log (compared to latest stable version 2.8)

    All functionalities of stable 2.8 are contained
    New: Completely built from scratch again based on latest Samsung source code drop Update8
    New: BFQ scheduler updated from version 5.1 to 6.0
    New: Users that do NOT use an exFat formatted storage can disable loading the proprietory exFat dirvers completely (via Tweaks App or Config file) to save some memory and maybe some CPU cycles. If you have exFat in use currently, the app displays a strong warning to you to make you aware it might not be a good idea for you
    New: If you overclock your GPU, a dialog will inform you that you might consider some overvolting for stability
    New: The clean init.d function in the tweaks app now creates a backup archive with all the removed scripts
    New: The debug info file name contains a time stamp now
    New: When using the "load&flash" function in the tweaks app, the kernel image does not get deleted anymore after the flash. So you can archive it, store it somewhere, and even flash again via mobile Odin if you like.
    New: New folder boeffla-kernel-data introduced: This folder will now contain things like the efs backup, the debug info files, the backup archive for the init.d cleanup, and the boot.img kernel file after load&flash. Now these files do not mess up your root directory on your sd card anymore.
    New: Addition script packs for the boeffla-tweaks app are now also installed into this new boeffla-kernel-data folder, older script packs automatically get migrated there (please be patient after first reboot, it can take a short while before it shows up in the tweaks app).
    New: Version control for the boeffla-tweaks app is now completely rewritten to be more robust
    New: Samsung ram disk updated to latest version
    New: SuperSu updated to latest version 1.25
    Fix: Charging rates are now showing up in the debug info file again
    Fix: last_kmsg log is generated again if kernel logging is enabled (was broken since 2.7)

By the way - this beta defines the scope now for the next 2.9 stable release. Unless you find severe bugs in beta2, I plan to release 2.9 stable by the end of next weekend. Let's see.

Then finally I will start working on my own kernel configuration app. Which fits quite nice for the versioning, this would for sure justify a jump to version 3.0 then.

PhilZ Touch 4.87.6 釋出
http://www.mediafire.com/?7n11iwa25xgdjr8

http://forum.xda-developers.com/showthread.php?t=2002953

New in PhilZ Touch v4.87.6
Full change log in below posts

    fix: show progress during TWRP backup and restore
    auto dim screen on timeout supported during backup and restore operations
    fix header menu could overlap battery stats if they are at 100%
    fix: restore custom rom zip failed because of left debug code
    fix: build custom rom zip from existing ROM would fail to restore if backup format was compressed
    huge performance optimize when building custom rom .zip from existing ROM (only backup needed partitions)
    fix useless edify incompatible code in custom rom .zip (alpha 06 files)
    show compatible phone variants in About