88碎鑽
本帖最後由 fth20 於 2016-7-31 16:43 編輯
我手機GPS 經常無法定位? 有大大幫忙修改gps.conf?
是可以定到位的,但是非常慢, 經常無法定位,我試數十次才成功.
NTP_SERVER怎樣修改?
AGPS看見只有一個,可以新增多個?
有大大可以教我修改NTP_SERVER及AGPS嗎?
以下是gps.conf內容- #Uncommenting these urls would only enable
- #the power up auto injection and force injection(test case).
- #XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin
- #XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
- #XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
- XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra2.bin
- XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra2.bin
- XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra2.bin
- # Error Estimate
- # _SET = 1
- # _CLEAR = 0
- ERR_ESTIMATE=0
- #Test
- NTP_SERVER=time.gpsonextra.net
- #Asia
- # NTP_SERVER=asia.pool.ntp.org
- #Europe
- # NTP_SERVER=europe.pool.ntp.org
- #North America
- # NTP_SERVER=north-america.pool.ntp.org
- # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
- # 4 - Debug, 5 - Verbose
- # If DEBUG_LEVEL is commented, Android"s logging levels will be used
- DEBUG_LEVEL = 2
- # Intermediate position report, 1=enable, 0=disable
- INTERMEDIATE_POS=0
- # supl version 1.0
- SUPL_VER=0x10000
- # GPS Capabilities bit mask
- # SCHEDULING = 0x01
- # MSB = 0x02
- # MSA = 0x04
- # ON_DEMAND_TIME = 0x10
- # GEOFENCE = 0x20
- # default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
- CAPABILITIES=0x13
- # Accuracy threshold for intermediate positions
- # less accurate positions are ignored, 0 for passing all positions
- # ACCURACY_THRES=5000
- ################################
- ##### AGPS server settings #####
- ################################
- # FOR SUPL SUPPORT, set the following
- SUPL_HOST=supl.Sonyericsson.com
- SUPL_PORT=7275
- # FOR C2K PDE SUPPORT, set the following
- # C2K_HOST=c2k.pde.com or IP
- # C2K_PORT=1234
- ####################################
- # LTE Positioning Profile Settings
- ####################################
- # 0: Enable RRLP on LTE(Default)
- # 1: Enable LPP_User_Plane on LTE
- # 2: Enable LPP_Control_Plane
- # 3: Enable both LPP_User_Plane and LPP_Control_Plane
- LPP_PROFILE = 0
- ################################
- # EXTRA SETTINGS
- ################################
- # NMEA provider (1=Modem Processor, 0=Application Processor)
- NMEA_PROVIDER=0
- ##################################################
- # Select Positioning Protocol on A-GLONASS system
- ##################################################
- # 0x1: RRC CPlane
- # 0x2: RRLP UPlane
- # 0x4: LLP Uplane
- A_GLONASS_POS_PROTOCOL_SELECT = 0
複製代碼
|
|