rr_i9100_Resurrection_Remix_unofficial_V4.0.1_Jun-08-13

看大家最近被電壓問題搞得很頭大！
我拿5隻s2測試出完美電壓大家可以參考！
1600-1450
1500-1375
1400-1300
1300-1250
1200-1200
1100-1125
1000-1050
800-1000
500-950
200-900
大致是這樣！
因為使用核心不同！
如分更細請自行低1檔
1檔=25！

scottyang 發表於 2012-9-15 08:49

                               
登錄/註冊後可看大圖

看到有新核心 thoravukk
有興趣的可去下來玩看 thoravukk-jb-4.3_cwm
http://www.team-blockbuster.com/

不好意思~有其他載點嗎，我都載到70幾mb就沒了…

請問~我之前用CM10的ROM~之後我直接刷到GT-I9100 Resurrection Remix JB v3.0.9的ROM

這樣會有甚麼影響嗎????

那我想請問一下........用程式用到一半會當機接下來重開~這個算是怪問題嗎@@?

如果是醬的話....我重新刷可以嗎??可以的話要怎麼重新刷ㄋ?

各位4.1.1 使用Siyah-s2-v4.1.5 不能使用，已經解決了，請下載2WIPE，再刷入即可
Siyah-s2-v4.1.5-cm10-jbmali-vsync_uevent-1011

最近聽了大大的建議重刷了dormanx核心5.87
不調整電壓，睡死情形比之前刷B版本調電壓好很多
但看YOUTUBE會當機，屢試不爽，該如何解決
順帶一提，ROM自帶的YOUTUBE無法在GOOGLEPLAY更新
用鈦備份將其刪除再下載OK

class20535 發表於 2012-10-12 17:46

                               
登錄/註冊後可看大圖

最近聽了大大的建議重刷了dormanx核心5.87
不調整電壓，睡死情形比之前刷B版本調電壓好很多
但看YOUTUBE會 ...

請不要用dormanx這個核心，我有po原本siyah這個核心已經更新了，請用這個核心一切都很美好

XDA上網友調配  參考看！依個人喜好了，想玩效能或穩省電的依個別考量使用那種核心！
且每一版本調整皆有些不同的。這兩種核心 國外使用者皆不少。
電壓調整是重點。 我想JB 4.1.2 RR3.** 快出了？
Rom: Resurrection Remix (JB)
Baseband: DVLP3 (Telstra)
Kernel: Dream Kernel
Applications: ExTweaks (Comes with ROM)

SETTINGS (CPU):

    DEFAULT CPU GOVERNOR = sleepy
    CPU STEP COUNTS = All available (18)
    SCALING_MAX_FREQ = 900 MHz
    SCALING_MIN_FREQ = 100 MHz
    SCALING_MAX_SUSPEND_FREQ = 500 MHz
    SCALING_MIN_SUSPEND_FREQ = 100 MHz
    SMOOTH SCALING LEVEL = 800MHz
    LOAD_H0 = 35%
    LOAD_L1 = 25%
    LOAD_RQ = 25%
    FREQ_MIN = 800 MHz
    GENTLE_FAIR_SLEEPERS = Enabled
    ARCH_POWER = Enabled
    CPU UNDERVOLTING = -50 mV

All other CPU settings as stock.

SETTINGS (GPU):

    MALI TOUCH BOOST LEVEL = Step 2
    GPU Freq Step 1 = 40MHz
    GPU Freq Step 2 = 66MHz
    GPU Freq Step 3 = 100MHz
    GPU Freq Step 4 = 160MHz

SETTINGS (GPU Voltages):

    GPU Voltage Level 1 = 800mV
    GPU Voltage Level 2 = 800mV
    GPU Voltage Level 3 = 800mV
    GPU Voltage Level 4 = 850mV

SETTINGS (GPU Thresholds):

    GPU THRESHOLD 1-UP = 75%
    GPU THRESHOLD 2-DOWN = 55%
    GPU THRESHOLD 2-UP = 90%
    GPU THRESHOLD 3-DOWN = 55%
    GPU THRESHOLD 3-UP = 90%
    GPU THRESHOLD 4-DOWN = 75%

All other GPU settings as stock.

SETTINGS (Screen, BLN & Misc):

    TOUCHMOVE SENSITIVITY = 5 pixel
    MIN_BL = 50
    MAX_GAMMA = 24
    mDNIe Negative Toggle = Disabled
    LCD-POWERSAVING MODE = Enabled
    GAMMA SHIFT = -5
    VIBRATION LEVEL = 25%
    BLN = Disabled
    LED-FADEOUT = Disabled
    LEDS ON WITH TOUCH = Disabled
    LED_TIMEOUT = Use ROM defaults (disabled)
    LED Voltage Level = 2700mV
    Android logger = Disabled
    DEFAULT I/O SCHEDULER = sio
    USB MASS STORAGE MODE = Force MTP Mode
    EXCLUSIVE WAKELOCK STATS = Enabled
    ENABLE BOOTMENU = BootMenu Disabled

All other Screen / Audio / BLN / Misc settings as stock.

Some people have been successful in undervolting the CPU to -100mV, but I am currently testing -50mV. Each result may vary.

Warning: Again, you may break your device or it could blow up and I won’t be held responsible. Just because these settings work for me, doesn’t mean they will for you.

Read more: http://justynsmith.info/resurrection-remix-dream-kernel-extweaks#ixzz295clRwR0

scottyang 發表於 2012-10-12 21:10

                               
登錄/註冊後可看大圖

XDA上網友調配  參考看！依個人喜好了，想玩效能或穩省電的依個別考量使用那種核心！
且每一版本調整皆有些 ...

jb版 可參考用看看，因自己手機上usb插座，還另掛上防電磁及環境殺菌的硬體，因此也沒測了。