S3 核心基頻選擇包更新第6版 (2013-01-13)

加好友 · 發表於 2013-5-5 23:27

finaleasy 發表於 2013-5-5 23:20

登錄/註冊後可看大圖

.........是的

但我看到這篇"Android ：耗電與省電之議題整合"

嗯...
你說的這篇我也看過
我當初也3個都關
就發現一直會FC
後來研究出來
加上Ding大有說明了
所以了解只能關2個 @@

加好友 · 發表於 2013-5-6 02:48

zRam is included, just select the zRam you want to use in boeffla-tweaks app (or config file if you prefer) and reboot (tx to Yank)
Wifi Mac address changing did not work in beta1, this is fixed now
Dynamic Sync Control bug fixes implemented - creditx to Faux, tx to Yank for the heads up
Some internal corrections and improvements

Download as always via the kernel home page or by pressing load&flash in boeffla-tweaks app.

加好友 · 發表於 2013-5-6 11:31

好複雜啊..........
持續研究中

加好友 · 發表於 2013-5-7 16:58

Completely built from scratch based on latest Samsung source code update 10
zRam implemented (please note to reboot your device after changing any zRam option in order to take effect) - Tx to Yank
zzmoove 0.4 governor - Tx to ZaneZam
Xbox controller support (standard is off, you have to enable in tweaks app or config file)
Wifi mac address changeable (only for specialists, if you want to know how to do please let me know)
New implementation for LED control like fading, blinking, brightness, speed - Tx to Yank
New implementation of android logger control (no reboot required anymore after activation/deactivation)
System Tweaks disabled per default
Dynamic sync control bug fixes incorporated
SD Card Tweaks (=read ahead buffer) can now be configured in several steps within boeffla-tweaks app (in config file you can freely configure the value within given range)
Fix permissions script can be executed in boeffla-tweaks app now
Boeffla-RamFS complete overhaul and optimisation
Battery monitor wakelocks reduced (maybe improving battery life a bit)
Ramdisk of EMC3 firmware
Compiled with stock ARM 4.7 toolchain

Download as always via the kernel home page or by pressing load&flash in boeffla-tweaks app.

加好友 · 發表於 2013-5-7 20:50

ba0411 發表於 2013-4-25 21:16

登錄/註冊後可看大圖

以下為目前幾款新的基頻直刷包
有興趣的人可以刷來試試
基頻直接刷入即可

ba大請教你個問題!!
Ding大這次S ROM更新後基頻換成MC2 可是怎麼總覺得本來的MB5好像收訊比較穩...這是心理作用嗎= =

我先來試試看MB6 這個沒看過@@!

加好友 · 發表於 2013-5-7 20:51

ab3132892 發表於 2013-5-7 20:50

登錄/註冊後可看大圖

ba大請教你個問題!!
Ding大這次S ROM更新後基頻換成MC2 可是怎麼總覺得本來的MB5好像收訊比較穩...這 ...

基頻本來就是在於個人
不一定每個人都一樣
會受到地區以及訊號好壞影響
所以挑最適合自己的就OK了
MB6是最新版的基頻

加好友 · 發表於 2013-5-7 21:00

ba0411 發表於 2013-5-7 20:51

登錄/註冊後可看大圖

基頻本來就是在於個人
不一定每個人都一樣
會受到地區以及訊號好壞影響

目前人在基隆
刷基前來這裡 3G都沒作用  訊號正常也是
那時候就是刷了Ding大的S ROM  突然都可以正常使用
這次更新完MC2就沒之前那麼好  剛才刷完MB6馬上有感覺！！

我用手機基地台給電腦　本來傳送一頁都好久　感覺比較順@@
測試中，感謝您的意見分享！！

加好友 · 發表於 2013-5-8 22:29

I pulled all the other test versions as this is the only "active" test version for now.

As always: Load via kernel homepage or load&flash.

加好友 · 發表於 2013-5-9 22:35

本帖最後由 ba0411 於 2013-5-12 18:36 編輯

Boeffla-Kernel 2.11-beta5 釋出

載點：boeffla-kernel-2.11-beta5-zz3_zram
載點：boeffla-kernel-2.11-beta5-zz4_nozram

原文：http://forum.xda-developers.com/showthread.php?t=1964572

boeffla-kernel-2.11-beta5-zz3_zram

This is the same as beta4, just zzmoove is downgraded from version 0.4 to 0.3 (this means, fast scaling is not available anymore), zRam is included

boeffla-kernel-2.11-beta5-zz4_nozram

加好友 · 發表於 2013-5-12 18:38

Boeffla-Kernel 2.10 stable 釋出

載點：http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/summary/7/430

原文：http://forum.xda-developers.com/showthread.php?t=1964572

2.10 stable is now available for you!

Change log (to 2.9 stable):

All functionalities of latest stable version 2.9
Fix permissions script can be executed in boeffla-tweaks app now (was a user request)
SD Card Tweaks (=read ahead buffer) can now be configured in several steps within boeffla-tweaks app (in config file you can freely configure the value within given range) - was also a user request
Battery monitor wakelocks reduced (maybe improving battery life a bit)
Based on Samsung source codes Update9 for the international Galaxy S3
Compiled with Linaro toolchain 4.7-2013.02

[分享] S3 核心基頻選擇包更新第6版 (2013-01-13)