手機內外卡交換

只是想請問一下：內外卡交換後  手機連接電腦  電腦會如何顯示(未開手機驅動程式與已開手機驅動)？
如果要抓檔案進手機時  檔案是會放在已經交換過的內卡或外卡？
安裝檔案後會佔用到已交換後的外卡嗎？還是只使用到已交換後的內卡？

我有抓某些軟件測試過了  我的手機沒有所謂的內卡  所以也不用改了  謝謝你

she2751673 發表於 2013-5-17 10:37

                               
登錄/註冊後可看大圖

不行  不過還是謝謝你

再試一次....

換成這樣試看看....

# Mounts the first usable partition of the specified device
dev_mount sdcard /mnt/emmc auto /devices/platform/msm_sdcc.2/mmc_host/mmc1
dev_mount emmc /mnt/sdcard 3 /devices/platform/msm_sdcc.3/mmc_host/mmc2

好厲害! 竟然可以這樣改。

我接觸到一些白牌手機，有的插上sd卡，名子會變，例，原來是sd，加上sd卡，會變成內存+sd。也有看過是原來叫sd，加入sd卡會變成sd1+sd2。

不行  不過還是謝謝你

she2751673 發表於 2013-5-14 19:52

                               
登錄/註冊後可看大圖

三星手機比較沒那麼繁雜才對吧!不管是2.X的哪支手機  除非有比較特殊  不然應該通用率蠻高的  只能試試看了 ...

做了點功課,發現你這隻手機不太一樣,
好像大家都是修改partition...
不過我還是盡量試看看了...
將內容修改成下面這樣...

###################################
# internal sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun0/file
asec = discard
discard = enable
}
dev_mount sdcard /mnt/sdcard auto /devices/platform/msm_sdcc.1/mmc_host/
# external sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun1/file
asec = enable
}
dev_mount sdcard1 /mnt/sdcard/external_sd 23 /devices/platform/msm_sdcc.3/mmc_host/
#end line ## keep this line

如果還不行,那我暫時就無能為力了.....

三星手機比較沒那麼繁雜才對吧!不管是2.X的哪支手機  除非有比較特殊  不然應該通用率蠻高的  只能試試看了  有2.3公版的嗎?你打的那些是要插在哪一行?總要試試看  反正我電腦有線刷檔  沒差

只有這麼短一行???
和公版的差異很大耶....
我不確定如果換成公版的你能不能用....

由 手機網頁 發佈

# Copyright (c) 2010, Code Aurora Forum. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#     * Redistributions of source code must retain the above copyright
#       notice, this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above
#       copyright notice, this list of conditions and the following
#       disclaimer in the documentation and/or other materials provided
#       with the distribution.
#     * Neither the name of Code Aurora Forum, Inc. nor the names of its
#       contributors may be used to endorse or promote products derived
#       from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
# ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

dev_mount sdcard /mnt/sdcard auto /devices/platform/msm_sdcc.1/mmc_host
手機Android版本號2.3.4的

看到你的手機型號...
應該是Android 2.2 Froyo版本吧?
一般看到的修改版本是給4.0用的

Android 2.2 Froyo應該要修改成下面這樣
============================================================
# internal sdcard
{
        mount_deep = 1
        ums_path = /sys/devices/platform/musb_hdrc/gadget/lun0/file
        asec = enable
        mbr_policy = overwrite
}
dev_mount sdcard1 /mnt/sdcard/external_sd 1 /devices/platform/mmci-omap-hs.1/mmc_host/mmc0

# externel sdcard
{
   mount_deep = 0
        ums_path = /sys/devices/platform/musb_hdrc/gadget/lun1/file
        asec = disable
        discard = enable
        mbr_policy = skip
}
dev_mount sdcard /mnt/sdcard 1 /devices/platform/mmci-omap-hs.0/mmc_host/mmc1
#end line ## keep this line
============================================================

以上是由公版的vold.fstab修改的,
手中沒有Samsung Galaxy Ace的vold.fstab檔,
不過我想應該差不多才是...
可以嘗試參考我上面改好的內容自行修改看看...
或是你貼你的vold.fstab內容讓我看看,或許可以幫你改...

我這隻手咪沒辦法改 所以我用分區EXT 分區大小自己分割 如果是32G的卡 也可以分割10幾G  一樣的效果
遊戲不怕沒地方放 謝謝指教