Acer A500 4.0.3 刷1.5G 超頻核心過程詳述

登錄/註冊後可看大圖

b1可用嗎?我想知道

將unlocked bootloader flash進A500
这个具体是什么意思！百度半天都不能理解！

謝謝大大分享
最近才剛入手這台平板
苦無資訊!!

11111111111111111111111111111

謝謝大大分享
最近想買平板說

a4gtrs 發表於 2012-11-9 11:08

                               
登錄/註冊後可看大圖

就是這麼做的。不是用ACER Recovery喔。

原文及相關連結參見

樓主 我照著一步驟一步驟做 可是進入cwm recovery mode 左上角出現Erasing cash before SDupdate SD updateCMD:recovery__update_package=SDCARD:update.zip Boostng recovery kernel image recovery verifield faild 無法進入

abcdefg1283@yah 發表於 2012-11-8 15:27

                               
登錄/註冊後可看大圖

但是若要使用Acer recovery刷入CWM recovery必須先unlocked bootloader 否則刷完CWM recovery image重開 ...

就是這麼做的。不是用ACER Recovery喔。

原文及相關連結參見
http://forum.xda-developers.com/showthread.php?t=1622425


Automated flashing tool

Quote:
USING blackthund3r ATX flash tool , It makes it all a little easier !

You need help on this ! Here is a walk thru!

Quote:
-download the APX-FLASH-Tool & Manager

-Download one of the V8 unlocked bootloader apx flash packages combined with a recovery of your choise.

V8-pubA50._public_recovery.a500apx
V8-Thor_1.7.3_recovery.a500apx
V8-TWRP_2.1.3_ICS_recovery.a500apx
- Firts you do the Steps 1-2-3- 4 of the main guide !!

-1-Reboot your tablet and make sure on your tablet: "Settings" -> "Applications" -> "Development" -> "USB debugging" switch on.

-2-Now start the "A500APXFlash.exe" , the tool will start .

-3-When it askes for your SBK you need to type it in , the v0.4 APX flash tool will give your SBK automaticly !!

-4-Now you select "Use an A500 APX Flash Tool Package.(.a500apx)

-5-Select the package that you want,(you click on the right arrow to continue)

-6-Now you can select "Manual Method" or "Automatic Method". (I always pick Automatic)

-7-Click on "Enter APX Mode" (now it will do his thing)

-8-When it says "Done! press to run again" (even if it says on the bottom of the app "no apx mode devices are connected") you click on the right arrow to continue.

-It will ask if you are ready (click yes if you are)

-Let the app do his thing and wait !!!!!! Until it says "Done! Press and hold power to switch off then power back on!"

a4gtrs 發表於 2012-10-22 12:06

                               
登錄/註冊後可看大圖

不用解鎖，照程序作就可以了

但是若要使用Acer recovery刷入CWM recovery必須先unlocked bootloader 否則刷完CWM recovery image重開要進入Recovery mode會發生錯誤   真的不用解鎖嗎?/= =

kason413 發表於 2012-10-14 19:50

                               
登錄/註冊後可看大圖

按照樓主方法，成功刷寫超頻核心，感謝！

2. 將unlocked bootloader flash進A500    重開機進入CWM recovery mode，並刷入ezT20-v1.0.1-a500_S.zip

這2個步驟可以說明詳細點嗎  拜脫了