內置sd卡與外置sd卡....互換位置

嗯.這個很實用!^^

謝謝分享.........................

感覺上，這是android沒考慮好。

有些手機把這內建與外接的『名子』取得不一樣，甚致於有沒有插t卡，『名稱』會不一樣。真是xxoo!!

樓主造福了很多網友呀~

由 手機網頁 發佈

是讓可以裝app的空間變大嗎??

來試試看
很實際的方法

Can it be installed software after reversing

我的跟你的不一樣耶!要怎麼改？
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##

#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label        - Label for the volume
## mount_point  - Where the volume will be mounted
## part         - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################

## Example of a standard sdcard mount for the emulator / Dream
# Mounts the first usable partition of the specified device
dev_mount sdcard /mnt/sdcard emmc@fat /devices/platform/goldfish_mmc.0 /devices/platform/mtk-sd.0/mmc_host
dev_mount sdcard2 /mnt/sdcard2 auto /devices/platform/goldfish_mmc.1 /devices/platform/mtk-sd.1/mmc_host
## Example of a dual card setup
# dev_mount left_sdcard  /mnt/sdcard1  auto /devices/platform/goldfish_mmc.0 /devices/platform/mtk-sd.0/mmc_host/mmc0
# dev_mount right_sdcard /mnt/sdcard2  auto /devices/platform/goldfish_mmc.1 /devices/platform/mtk-sd.2/mmc_host/mmc2

## Example of specifying a specific partition for mounts
# dev_mount sdcard /mnt/sdcard 2 /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1

very good!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

這超讚的!!!來去試試

真的很實用!!
但手機需刷機.......這就有點卻步......(其實根本不會刷啦!!)
但還是推一下!!