S3 核心基頻選擇包 更新第6版 (2013-01-13)

PhilZ Touch 4.93.6 釋出
載點：http://www.mediafire.com/?mc2vgt5ndy2yfok

原文：http://forum.xda-developers.com/showthread.php?t=2002953

- fix reboot to bootloader for phones without download mode
- define default values for CWM Advanced Edition builds to non officially supported devices by PhilZ Touch
- no need to confirm sideload as it can be cancelled
- move philz settings file from /system to /data
- fix compile error for non PhilZ Touch version
- revert temporary assert fix for i9100/n7000 (ramdisk changes):
* do not mount /system in init.rc
* add needed entries in default.prop
- n7000: no more replace init binary to fix /data corruption bootloop issue (ramdisk changes)

Adam kernel v2.3 釋出
載點：http://goo.gl/vygp8

原文：http://forum.xda-developers.com/showthread.php?t=2189061

Changes-log v2.3:

                               
登錄/註冊後可看大圖

Patched with Samsung sources Update10

                               
登錄/註冊後可看大圖

Dynamic FSync Control

                               
登錄/註冊後可看大圖

Other small permission fixes from MC3 InitRamfs

Adam kernel v2.4 釋出
載點：http://xdafileserver.nl/index.php?dir=Samsung%2FGalaxy+S+III%2FCUSTOM+ROMS%2Fwanamlite%2FKernel%2F2.4

原文：http://forum.xda-developers.com/showthread.php?t=2189061


Changes-log v2.4:

                               
登錄/註冊後可看大圖

Add Zmoove and Lulzactiveq cpu governors (Thanks to the Authors)

                               
登錄/註冊後可看大圖

Proportional Rate Reduction for TCP (Thanks to Nandita Dukkipati)

                               
登錄/註冊後可看大圖

LTE updates built on stock LTE config (should fix some connection issues)

                               
登錄/註冊後可看大圖

CPU voltage control for UV trough Stweaks (Thanks to AndreiLux)

                               
登錄/註冊後可看大圖

Black crush fix (Thanks to Andip and AndreiLux)                

ab3132892 發表於 2013-4-25 20:41

                               
登錄/註冊後可看大圖

ba大 不好意思  請教一下
這篇發的是甚麼東西，沒看過的@@...

是wanam大神的核心
還不錯用
可以參考試用看看 ^^

ps 4.2.1的rom不適用

ab3132892 發表於 2013-4-25 21:03

                               
登錄/註冊後可看大圖

感謝你這麼用心，之前爬文沒有爬到這裡。
把PhilZ Touch 4.93.6 更新的網址貼上去  結果被砍掉XD
ba大真 ...

不會 別客氣
想說 有新的 就集中發這邊
幫低調大更新 @@
我本身都會定期去查看xda的原文的 XDDD

以下為目前幾款新的基頻直刷包
有興趣的人可以刷來試試
基頻直接刷入即可
無需再3W
若是不放心可以2W再刷入


modem_CWM_I9300XXEMB5
載點：http://www.mediafire.com/?jtgq0ej51a4a1h8

modem_CWM_I9300XXEMC2
載點：http://www.mediafire.com/?44x92v2499l8djh

modem_CWM_I9300XXEMB6
載點：http://www.mediafire.com/?soyydczz5zr9y60

finaleasy 發表於 2013-4-28 03:35

                               
登錄/註冊後可看大圖

你好 想請教一下!

我手機刷了D大的ROM一切正常

死當 應該跟基頻無關
如果 刷完怪怪的 或是發生死當
建議你先2W試試
2W能解決多數問題
如果2W還是無法解決
那就是要試試重刷ROM了

PhilZ Touch 4.96.5 釋出
載點：http://www.mediafire.com/?unz5n65sjtqdcgu

原文：http://forum.xda-developers.com/showthread.php?t=2002953


New 4.96.5 (28.04.2013)

- change event input handling code to support auto-interpolation
- auto support for devices built-in virtual keys
- enable key repeat for recovery virtual buttons (up/down): now they auto-repeat while pressed
- fix HTC One X nandroid backup was very slow (ramdisk changes)
- fix touch for new N71xx, T889, I317/M repacks based on wanam Adam 2.3 kernel to fix boot delay for non stock kernels
- misc bug fixes and code optimization

Boeffla-Kernel 2.11-beta1 釋出
載點：http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/summary/4/380

原文：http://forum.xda-developers.com/showthread.php?t=1964572


2.11-beta1

Important note: I recommend strongly to reset all kernel configuration to default settings before flashing the new kernel (Tap "APP: Reset all settings" in Boeffla-Tweaks app) and configure your settings again after the flash. This procedure is required this time to avoid side effects.

Change Log (vs last stable version 2.9):

• All functionalities of last stable version 2.9 included
• Completely built from scratch on latest Samsung sources update10
• Zzmoove governor Version 0.4 with fast scaling (Thanks to ZaneZam)
• New implementation for LED control like fading, blinking, brightness, speed (Thanks to Yank)
• System Tweaks disabled per default
• SD Card Tweaks (=read ahead buffer) can now be configured in several steps within boeffla-tweaks app (in config file you can freely configure the value within given range)
• New implementation of android logger control (no reboot required anymore after activation/deactivation)
• Fix permissions script can be executed in boeffla-tweaks app now
• Battery monitor wakelocks reduced (maybe improving battery life a bit)
• Boeffla-RamFS complete overhaul and optimisation
• Ramdisk of EMC3 firmware
• Compiled with latest Linaro Toolchain 4.7-2013.04 from April

As always, please download from the kernel homepage or just use Load&Flash in Boeffla-Tweaks App.

Kernel Perseus alpha36.3 釋出
載點：http://forum.xda-developers.com/attachment.php?attachmentid=1913596&d=1366982644

原文：http://forum.xda-developers.com/showthread.php?t=1691401


Perseus alpha36.3 (26/04):

• Fixed slice lookup issue on ABB: It's recommended you put your slices back to default before flashing if you changed them to borderline stability values. Please upgrade.