馬上加入Android 台灣中文網,立即免費下載應用遊戲。
您需要 登錄 才可以下載或查看,沒有帳號?註冊
x
本帖最後由 ktsj200741 於 2016-7-11 12:41 編輯
1. Switch accounts up to 8!
To set up total accounts on emulator, go to tab BotProfiles and set at "Total CoC Accounts"
2. Dynamic choose group of accounts to play one time:
- By GUI setup, go to tab BotProfiles and set "CoC Accounts botting order"
Example: set order as "123"
mean bot will play on three accounst: 1st, 2nd and 3rd, and switching step is: 1->2->3->1 ..... Change the value to your case.
- For RUNNING TIME setup, use pushbullet message: BOT ACC ..., BOT ADD <account no>, or BOT REM <account no>
eg: BOT ACC 138 => bot play with switching step is: 1->3->8->1 .....
BOT ACC 1386 => add account 6 to order list => bot play with switching step is: 1->3->8->6->1 .....
BOT ACC 3 => play only on account 3
BOT ADD 6 => add account number 6 to playing list
BOT REM 6 => remove account number 6 from playing list
3. Dynamic setup profiles correspond to accounts:
- By GUI setup, go to tab BotProfiles and set "BOT profile Indexs order", choose profiles" index correspond to all accounts registered on your emulator:
Example, set as: 12311111
Digit N is the profile index correspond to account N. I have 8 accounts so set up with 8 digits
For example, you have 2 accounts and the 1st one using profile 1, the 2nd one using profile 3, just set up: profile = 13
- For RUNNING TIME setup, use pushbullet commands: BOT PRO ..., BOT ALLPRO ... and BOT MAP ...
BOT PRO use for set up profiles correspond to playing accounts in ordered step. Example, you have 3 accounts set up by BOT ACC 138, so with command: BOT PRO 124, account 1 will use profile 1, account 3 use profile 2, and account 8 use profile 4
BOT ALLPRO use for set up profiles correspond to all exists accounts. Example, BOT ALLPRO 12323245 will set up profile for all 8 accounts with digit N is profile index of account N
BOT MAP will set up profile for only one account: BOT MAP 2-5 => account 2 use profile 5
(Tips: in my experience, I always setup 1 account as train/donate only with full army setting to >=80%. If the donation account require 100% as full army, it will take longer time to stay at this acc.)
4. Get current order by pushbullet msg: BOT GETORDER
5. Option to enable/disable attack plan.
If this option is disabled, the attack plan of profile have no meaning, bot will always go to attack after full army
- On GUI, config on tab BotProfiles => set check box "Check attack plan"
- Pushbullet command: BOT ATKP 1 => enable attack plan,
and: BOT ATKP 0 => disable attack plan
6. Option to tell the bot go to relax, if one account in order list is not in attack plan. Set "Relax attack together" on GUI
Note that all the BOT command will be applied on next sưitching step
|