當LG G3 刷機 刷到不能動也無法透過LG Recovery 如何 reset

如果LG G3 刷機 或 Root機，或用recovery 隨意操作。使得機器無法開機或者變成磚塊。

可以使用下列聯結。讓手機可以回到官方的recovery 或 第三方的recovery.

昨天刷機，亂動recovery使得手機變成磚塊。操作下列步驟完成，回到第三方的recovery，可以繼續刷機。

以下資訊供參考



Master reset with hardware keys



If the device menus are frozen or unresponsive, you can master reset using hardware keys. For this operation, you will use the Volume down key to move the screen cursor to select items and the Power key to perform actions. Both are located on the back of the device as shown.



To perform a master reset using the hardware keys, follow these steps:



  

• Back up all data on the internal memory.
•     Turn off the device.
•     Press and hold the Power and Volume down keys on the back of the device.power volume down.png
•     When the LG logo appears, release and then re-hold the Power key while continuing to hold the Volume down key.
•     The Factory data reset screen appears.
•     Press the Volume down key to advance the cursor until Yes is selected.
•     Press the Power key to confirm.
•     The Erase all user data and restore default settings screen appears.
•     Press the Volume down key until Yes is selected.
•     Press the Power key to confirm.
•     The device restarts. Wait until the process is finished.
•     Your device is now reset to its original factory settings.
  

以下三個步驟特別注意。

   2.Turn off the device.
關機10秒以上，或拿下電池，再裝回去。

    3.Press and hold the Power and Volume down keys on the back of the device.
先按下【Volume -】再按 Power鍵。免得先觸動Power鍵先觸動系統開機。這兩個鍵緊按不放。

    4.When the LG logo appears, release and then re-hold the Power key while continuing to hold the Volume down key.
當LG logo 出現時，先放開Power鍵，但【Volume -】還緊按著不動。接著馬上再按Power鍵。這時power鍵與【Volume -】是同時按著不放。直到系統recovery出現。

當出現系統recovery，就跟著【5】以下的繼續操作。

供參