NOTE4内核Suemax kernel_Lite-v1.6 for N910U - Android 台灣中文網

12381146_1117936941558128_335194486_o.jpg (238.89 KB, 下載次數: 4)

下載附件保存到相冊

2016-2-22 15:59 上傳

内核Suemax kernel_Lite-v1.6

核心Suemax_kernel_Lite-v1.6_N910U.zip (10.67 MB, 下載次數: 65)

2016-2-22 16:00 上傳

點擊文件名下載附件
閱讀權限: 10

核心修正版Suemax_kernel_Lite-v1.6_N910U.zip (8.15 MB, 下載次數: 127, 售價: 1 個碎鑽)

2016-2-22 16:00 上傳

點擊文件名下載附件
閱讀權限: 10

來自XDA

Note Read Carefully Before Flashing my kernel :

1) Keep the thread clean and try to research before e.g Google or wiki Before posting any further queries.

2) As mentioned Over-Clocking and Under-Clocking CPU or GPU is Not really healthy for Devise Hardware,So keep in mind its
Only an Option i"m providing due to its Got some limitations and might Damage soc in Extreme .

3) Under-Volting or Over-Volting CPU or Gpu to Extreme is not Helthy either And on Exynos 5433 soc it waries on scale
ASV-Group 0 to 15 (The higher the ASV, the higher frequencies your device can run and lower voltages).

4) And Ofcourse Need not to ask best settings (This term does not exist) for your devise e.g Undervolting etc And read
point 3 again . FYI : All users are different and So is devise Soc and there Usage + Usability of each User.

5) About Random-reboots are often Happens due to Unstable user Settings .So think twise before to apply any setting in
Snaypse app e.g CPU ,GPU or IO requires resrating Snaypse App or Even reqires a Rebooting devise to make apply proper
Setting like Under-Volting or IO scheduler.

6) No Asking ETAs and Special-demands .

7) Everything is detailed and explained in Synapse app for Most Users and All settings Values are Stock On first Boot.

8) Use Only SYNAPSE app to Control Kernel.

Kernel log :

1) CPU Clock A57 aka Big-cores : 500mhz to 2100mhz limitations (700mhz- 1900mhz set to stock default)

2) CPU CLOCKS A53 aka Small-cores : 200mhz to 1600mhz limitations (400mhz- 1300mhz set to stock default)

3) CPU GOVs :

a) INTERACTIVE (set as Default)

b) ONDEMAND ( Optional and tweaked for extra powersaving + performance)

4) GPU CLOCK :

a) limitations : 100mhz to 730mhz (160mhz - 600mhz set to stock default)

5) GPU GOV :

a) INTERECTIVE (set as Default)

b) DEFAULT (stock)

c) BOOSTER

d) STATIC

6) Mali POWER POLICY CONTROL

a) Coarse_demand

b) Demand

c) Always_On

7) IO Schedulers :

a) CFQ (set as Default)

b) NOOP (Optimized )

c) DEADLINE (Optimized for better performance + SSD)

d) ROW

e) BFQ (Added latest version-7r7 by @paolo Valente)

f) FIOPS

Note : Read This post for more Information about IO and CPU govornors http://forum.xda-developers.com/show....php?t=1950084

8) NTFS (Enabled + 3rd party app control)

9) DE-knoxed (ramdisk + Kernel)

10) SELUNIX : permissive (Samsung Hard enforcing)

作者: ha78 時間: 2016-2-24 09:46
請問刷這個內核後有沒有發熱，哪怕是很微弱的熱

正常不發熱的話，手機放一邊10分鐘拿起來，後背是冷的

作者: 0905569577 時間: 2016-2-25 09:53
來試試..變磚頭不怕.. 變磚還能用來蓋房子!!

作者: toafu1 時間: 2016-2-29 10:16
看不懂刷了和原廠比起來有何差異 , 有人要提供心得嗎

作者: bc780902 時間: 2016-2-29 18:21
本帖最後由 bc780902 於 2016-2-29 20:13 編輯

刷完之後有變省電

原本下班的時候電量剩下50～60%

今天發現下班的時候發現居然還有70%...

還有試過跑一下分

安兔兔6.0.4跑8萬可以取代Note5了...

看了一下說明

好像滿載時時脈可以拉更高

閒置時時脈可以降更低吧...

補上圖片

登錄/註冊後可看大圖

Screenshot_2016-02-28-23-47-44.png (172.2 KB, 下載次數: 4)

下載附件保存到相冊

2016-2-29 20:11 上傳

原本的

登錄/註冊後可看大圖