yamagasi 發表於 2015-5-14 13:06
可是好像還不行root 是不是阿 XD
ckyong 發表於 2015-5-15 10:01
沉默root功能是关闭。
去关于手机->点版本号 12次 会开启开发者选择进去里面可以打开root可能 ...
lkkxx1234 發表於 2015-5-21 15:38
請問版大!!
要先降級2.3.5嗎?還是直接刷入就行??
ckyong 發表於 2015-5-22 14:58
直接刷入就行
lkkxx1234 發表於 2015-5-22 20:49
還好之前有刷過2.3.5的經驗!!
用了odin線刷之後~手機回來了!!!
看樣子真的要好好的上一課才行!!
CM12.1 N7000 刷機的方法有兩種
<A>
If you are running an custom Kitkat 4.4 Rom or an earlier NightOwl Beta:
1. Copy Rom + Google Apps to your device.
2. Boot into recovery
3a. Factory Reset (Recommended to avoid any FC or bootloops) (Updates from older NightOwl Betas should work without Factory reset)
3b. Wipe the dalvik-cache in recovery after updating from an older beta!!!
4. Flash the Rom and Gapps.
5. Reboot
<B>
If you have already an samsung 4.1.x running you can skip step 1
1.flash N7000ZSLR1_N7000OZSLR1_BRI (or any other other 4.1.2) stock rom using odin
2.flash PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5 (http://d-h.st/OTu) to get cwm recovery by using odin or mobile odin
3. boot into recovery
4. flash this kernel https://www.androidfilehost.com/?fid=95887005526788121 to get an updated cwm recovery
(this step will make your old rom unbootable stuck in the n7000 screen but you can boot into recovery with press and hold "home" and "volume+" buttons and power on your phone)
5. you need to reboot! your device now to recovery
6. you are now in the updated recovery and you can now install the rom and gapps and do an factory reset
7. Reboot
注意 :
If you want to use another kernel make sure that it"s ready for CM12.1 Beta 1/2/3/4/5 (Do not use older kernel for CM12.0 in the CM12.1 Betas! Kernel for CM12.1 Preview/Beta 1/2/3 should work in CM12.1 Beta 5 too, but do not use the Beta4 kernel in Beta5! )
sp669 發表於 2015-5-29 17:14
剛好看到有位外國網友已幫忙補檔了, 有需要的人可以到那邊XDA論壇下載那個附件檔 ~
philz_touch_6.48.4-n7 ...
lemasmi5 發表於 2015-5-4 22:57
#記得務必備份EFS以免IMEI飄飄飄飄掉了~~~
先安裝~
Philz Recovery
dragon0614 發表於 2015-11-21 15:33
這個版本有中文嘛
歡迎光臨 Android 台灣中文網 (https://apk.tw/) | Powered by Discuz! X3.1 |