Android 台灣中文網

標題: TWM mypad2 = ZTE V9c 平板 recovery刷壞求助 [打印本頁]

作者: orzkng2007 時間: 2012-1-29 11:07
標題: TWM mypad2 = ZTE V9c 平板 recovery刷壞求助
開機沒辦法用Recovery 之前root之後安裝CWM Manger 安裝clockmod 但是用完之後沒辦法開啟recovery模式會一直卡在TWM的圖是那邊要怎麼恢復原來的Recovery 目前是可以開到正常的Android 2.3.4 就是沒辦法啟動Recovery!!
另外求怎麼刷ROM

作者: orzkng2007 時間: 2012-2-10 13:30
可以刪掉了我已經自己解決了
1. Download the recovery.img image file.
2. Transfer it to a sd card. Make sure it is in the root directory and not inside any folder.
3. Now download Terminal Emulator or ConnectBOT (my preference) from the Android Market.
4. Run ConnectBOT. If you are using ConnectBOT , create a connection to “localhost” and a terminal should open.
5. In the terminal type “su” and press enter.
6. If you have superuser installed, it will popup and ask you to provide permission to ConnectBOT, do it.
7. If you use Terminal Emulator instead, run it and type su, if Superuser pops up, give it permission.
8. Now in the next line type

***flash_image recovery /sdcard/recovery.img***

9. The phone may seem to hang for few minutes and than you should see the command prompt in the next line.
10. Type

***reboot***

12. Now while turning on try to enter into recovery mode again, you should be in your stock recovery mode.

作者: kcc20020105 時間: 2012-3-31 10:31
讚賞你不斷的努力, 得到回報, 還多謝分享!!

作者: linsp 時間: 2012-6-20 23:57

orzkng2007 發表於 2012-2-10 13:30

登錄/註冊後可看大圖

可以刪掉了我已經自己解決了
1. Download the recovery.img image file.
2. Transfer it to a sd card. Ma ...

你好,請問recovery.img檔可以在那裡下載.謝謝!

作者: yuhsin 時間: 2012-11-27 23:44
我也急需原廠的因硬體有問題，不然送修不保固。

作者: orzkng2007 時間: 2012-11-28 18:21

yuhsin 發表於 2012-11-27 23:44

登錄/註冊後可看大圖

我也急需原廠的因硬體有問題，不然送修不保固。

你的情況是?怎麼樣能詳細說明嗎?

歡迎光臨 Android 台灣中文網 (https://apk.tw/)