Android 台灣中文網

標題: 【純搬運】4.1.2新內核-Forzaferrarileo JB kernel V4（超頻至1.7 [打印本頁]

---

作者: sam595    時間: 2013-7-30 19:20
標題: 【純搬運】4.1.2新內核-Forzaferrarileo JB kernel V4（超頻至1.7


最近因為音量鍵+的bug搞到我快煩死了= =
所以逛逛XDA去看看有啥好內核來刷（題外話：該死的 ＄ony啥時更新阿，音量鍵bug問題很大ㄟ
找到這個好內核，大家看看吧
------------------------------------------
更新日誌（英文好的自己翻吧，大致說下就是優化，超頻等等）：
Features
[V1] Prerooted and with cwm recovery (thanks to Doomlord)
[V1] CPU OC up to 1900 Mhz and UC to 30 Mhz
[V1] Build Optimization
[V1] Compiled with Linaro
[V1] VDD sysfs (voltage control interface)
[V1.1] Boot freq capped at 1512Mhz
[V1.1] Upstream to Linux 3.4.3
[V1.1] Two version : 1.7 Ghz and 1.9 Ghz
[V1.4] WriteBack tweaks
[V1.4] Gpu 2D/3D OC
[V1.4] Tweaked a bit Lionheart
[V1.4] Use glibc for memcpy and memmove
[V1.4] Increased Sd card cache(READAHEAD)
[V1.4] LINUX 3.4.4(from 3.4.0)
[V2] Added and tweaked MpDecision to have best performance and battery life
[V2] LOAD_FREQ (4*Hz+61) avoids loadavg moire
[V2] Some scheduler Tweak
[V2] Pipe compiling
[V2] Arm Thumbee support
[V2] Emmc latency decreased (more reactive)
[V2] Tweaked slub allocator
[V2] Tweaked Lionheart Governor to be less aggressive , so more battery friendly
[V2] Tweaked Pegasusq Governor to be more interactive and with better hotplug decision
[V2] Linux 3.4.20
[V2] Reworked a bit GPU OC
[V3] Improved WorkQueue for high priority
[V3] Switched build optimization
[V3] Tweaked Badass governor
[V3] msm :kgsl : Process all idle checks
[V3] Cpu1 fix : Cpu1 will follow cpu0 governor and min/max freq
[V3] Added Simple GPU governor (thanks to @faux123 ) ->>>>>>>>> To enable it use Trickster Mod app or Fauxclock app
[V3] Base for thermal management
[V3] Switched to westwood TCP congestion algorithm

Governor
[V1] Enabled Interactive governor
[V1.4] Lionheart governor
[V2] Added Pegasusq governor -> [Removed in V3 ]
[V3] Added Badass governor ( thanks to @show-p1984 )


Scheduler
[V1] Added SIO scheduler
[V1.4] Added Zen scheduler
[V2] Added Row scheduler
[V3] Added Fifo scheduler
[V3] Added Row scheduler
[V3] Added Fiops scheduler
-------------------------------刷入內核需解鎖
刷入方法：
解壓縮把裡面kernel文件照我po的站子作
超可愛傳送門，步驟是3～6步2.也可以CWM直接卡刷刷入
-----------------分隔線君---------------
有XDA會員的去給元作者感謝一下吧！
Forzaferrarileo JB kernel V4
-------------------------------------------
一些載圖（上面英文看不懂的，可以看看，總之就超頻等等等）：

登錄/註冊後可看大圖