=下載點=.txt
(41 Bytes, 下載次數: 1154)2013-1-13 18:02 上傳
點擊文件名下載附件
-------------01/12更新內容-------------XDA內核更新 boeffla-kernel-2.6-beta1
增加原廠CWM (ZSDLL1提取)
刪除Perseus.alpha27.2
更新Perseus.alpha31.2
-------------1核心清除選擇-------------
不清除舊核心資料
清除舊核心資料(感謝,腳本來自Ding大的清除腳本V2)
-------------2原廠核心選擇-------------
I9300XXELK4 內核
I9300XXELKC 內核
I9300XXELL4 內核
I9300XXELL5 內核
I9300XXELLA 內核
-------------3核心選擇-------------
AbyssJB Kernel 2.3.0 記憶體859MB
GalaxSih-JB-v2.0-beta7 記憶體862MB
Perseus.alpha31.2 記憶體856MB
Phenomenal4.0Extreme 記憶體839MB
Phenomenal4.0Medium 記憶體839MB
Siyah Kernel 1.8.6 記憶體833MBboeffla-kernel-2.4 記憶體837MBboeffla-kernel-2.5-alpha3 記憶體837MB
-------------4基頻選擇-------------
BUELK4
XXDLI8
XXDLIB
XXDLID
XXELKC
XXELL4
XXELLA
-------------5CWM選擇-------------
Recovery-CWM-6.0.1.4
Recovery-CWM-6.0.2.7
Abyss Recovery 1.9.6
CWM 5.5
Philz_touch_3.9.9-i9300
原廠CWM (ZSDLL1提取)
作者: aus 時間: 2013-1-1 19:32
本帖最後由 aus 於 2013-1-1 19:55 編輯
才剛刷完beta3，緊接著又有beta4，趕緊來update
BTW，Beta3的省電效果還沒有ba大描述的好，可能是還有其他需要抓出來的，持續研究中...
作者: superjimmy 時間: 2013-1-2 02:58
持續研究中, 這門學問真是太大了
作者: q0972366700 時間: 2013-1-2 03:11
大大，權限哪邊要打勾？我看不太懂@@
作者: a09262906 時間: 2013-1-2 10:52
請問大大，我ROM是刷也是你發表的XXELL5 4.1.2官方最新正式版 Omega V35
核心Beoffla-kernel-2.4-beta4
基頻XXELL4
內核XXELL5
刷的時候也有用wipe清除全部資料，為什麼會非常耗電…充完電後去睡覺起床後
都只剩70~80%左右
是哪裡有問題嗎……？
也刷過Beoffla-kernel-2.4-beta3
作者: 低調中的高調 時間: 2013-1-2 10:55
a09262906 發表於 2013-1-2 10:52
請問大大，我ROM是刷也是你發表的XXELL5 4.1.2官方最新正式版 Omega V35
核心Beoffla-kernel-2.4-beta4
基 ...
看看自己裝了什麼程式吧造成耗電的吧
沒裝程式我測試每小時0.3~0.5%
目前裝了200個左右也才每小時1.0%~1.2%左右
作者: a09262906 時間: 2013-1-2 11:25
請問要安裝什麼監控軟體可以看程式耗電？
作者: a09262906 時間: 2013-1-2 13:28
謝囉大大 ~ 有什麼問題再問你 XD
作者: sking512 時間: 2013-1-2 15:03
提示: 作者被禁止或刪除 內容自動屏蔽
作者: a09262906 時間: 2013-1-2 17:05
大大~我有安裝了BetterBatteryStats
但是看不太懂 因為都是英文=口= 我有截了幾張圖 可以麻煩幫我看一下嗎...?
作者: ba0411 時間: 2013-1-2 17:42
你可以考慮用b2版
b2很省電 @@
作者: ba0411 時間: 2013-1-2 17:42
找出耗電的原因 , 使用BetterBatteryStat 和 Battery Monitor Widget Pro
http://iamfishfish.blogspot.hk/2012/03/betterbatterystat-battery-monitor.html
這篇教學給你參考一下
作者: koduckcat 時間: 2013-1-2 18:54
THX..........試試看!
作者: michaelwongwong 時間: 2013-1-2 20:07
讚拉!!!沙發坐!!
作者: hdj0001 時間: 2013-1-3 03:06
谢谢。。
作者: ba0411 時間: 2013-1-4 00:21
本帖最後由 ba0411 於 2013-1-5 02:19 編輯
Boeffla-kernel 更新 2.4-bata5
HDMI/MHL 此版已支援
有興趣的可至作者網頁下載
http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/viewcategory/4
作者: aus 時間: 2013-1-4 09:54
ba大，我正準備換刷版大最新一版的ROM(LLA)，是採用SiyahKernel
請問依你的經驗，SiyahKernel和Boeffla-kernel，各有甚麼優缺點呢？
建議換刷嗎？
Thanks.
作者: 老納送您歸西 時間: 2013-1-5 01:52
B牌bata5核心很穩定
目前待機0.8/H
作者: ba0411 時間: 2013-1-5 02:18
本帖最後由 ba0411 於 2013-1-5 02:21 編輯
看你個人需求吧
Ding大有寫一篇介紹文
你可以去找來看看比較一下 =_=
如果對照相的卡通效果跟雙ROM功能
這兩個你覺得沒一定要
那可以考慮B核
B核比較省電
S核相對功能齊全
但跟B核相比稍耗電
所以 自己衡量吧
另外 建議你多爬文找文
很多大神都有寫教學或介紹文...
作者: ba0411 時間: 2013-1-5 02:19
本帖最後由 ba0411 於 2013-1-5 04:49 編輯
Boeffla-kernel 更新 2.4 正式版
http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/viewcategory/7
Boeffla-kernel 更新 2.5-alpha2 版
http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/viewcategory/4
[Galaxy S III ] 認識 Boeffla-Kernel
http://dingdingc.blogspot.tw/2012/12/galaxy-s-iii-boeffla-kernel.html
作者: virgil010030 時間: 2013-1-5 05:13
看不太懂...我再多爬爬文好了...頭大
作者: small1219 時間: 2013-1-5 11:14
Ding大網站上有寫請勿刷在 CM 或 AOSP ROM
CM 或 AOSP ROM 是哪個版本的ROM
作者: 19840321 時間: 2013-1-6 22:51
棒棒棒棒棒棒棒棒棒棒棒棒棒棒棒棒棒棒
作者: SANJI1110 時間: 2013-1-7 00:51
好東西~感謝大大分享~~~~
作者: 86888 時間: 2013-1-7 17:37
問一個外行的問題
基頻會影響網路分享嗎
最近ELL4打遊戲都laglag的
另外台哥大有沒有推薦哪一款呢
謝謝
作者: ba0411 時間: 2013-1-7 17:59
基頻影響的是網路訊號
你如果覺得現在用的版本不好
可以挑其他版的換
一個一個去測
挑出適合你的版本 @@
作者: 86888 時間: 2013-1-7 22:54
好吧
我再一個一個試試看
打lol瘋狂斷線快被罵死了=＿=
作者: ba0411 時間: 2013-1-7 22:58
可以挑幾個一般大家常用的基頻去測 @@
作者: king1834 時間: 2013-1-7 23:07
抱歉版主...我是新手 想詢問說...你所發佈的程式...是可以自行選擇嗎....由於是新手...第一次問問題
作者: maylleyns 時間: 2013-1-8 08:55
新手一問
這壓縮檔是直接拋入內存然後進入CWM模式install嗎?
作者: ba0411 時間: 2013-1-9 16:09
本帖最後由 ba0411 於 2013-1-10 04:35 編輯
boeffla-kernel-2.6-alpha1 釋出
請務必更新 有修正
作者網站
http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/viewcategory/4
2.6-alpha1 Change Log
Completely implemented all features from scratch on basis of latest sources GT-I9300_JB_Opensource_Update7
All features of latest stable kernel 2.4 implemented
Only exception: GPU undervolting is removed (maybe temporarily, mabe forever, time will tell)
New: Ramfs of latest firmware xxella used
New: fsync implemented
Fix: CPU max frequency setting via config file working again
Fix: crt-off should be working for all implementations
Fix: Boeffla-Sound version information corrected (was only cosmetic issue)
Fix: Boeffla-Kernel folder deletion via Boeffla-Tweaks app corrected
[Galaxy S III ] 認識 Boeffla-Kernel
http://dingdingc.blogspot.tw/2012/12/galaxy-s-iii-boeffla-kernel.html
作者: ba0411 時間: 2013-1-10 04:34
PhilZ Touch v4.00-b4 釋出
http://forum.xda-developers.com/showthread.php?t=2002953
New in v4.00-b04 Recovery (CWM 6.0.2.7 based)
- Repack with XXELLA kernel supposed to be SDS safe
- Fix romname added to nandroid backups: now build.prop will be parsed instead of reading system properties
- Custom rom.zip scripts completely revised to show progress and handle errors (beta and will be completely revised in Final build)
作者: harry5112 時間: 2013-1-12 10:51
請問一下板大
這是直刷包嗎
我是新手
還是要解壓縮
作者: 低調中的高調 時間: 2013-1-12 20:48
更新第6版 2013/01/12
更新3處 ； 載點已更新
作者: N990107 時間: 2013-1-13 12:49
2原廠核心選擇 跟 3核心選擇 有什麼不同? 是要做搭配還是怎樣?
作者: N990107 時間: 2013-1-13 13:13
Perseus.alpha31.2 安裝下去會變原廠內核耶 可以再試試看嘛
作者: 低調中的高調 時間: 2013-1-13 14:55
我稍後更新，路徑沒改到
作者: jay10101 時間: 2013-1-16 21:18
大大
小弟我下載下來~~
這個壓縮檔直接放入手機刷還是??怎麼選擇刷入呢?
小弟的疑問!!!不好意思
因為看到裡面都是很多基頻根內核的資料夾跟黨
不像之前遇到的直刷包...之類的
所以不太懂
作者: ddt89095 時間: 2013-1-17 19:00
直接刷入會與原本手機本身的基頻核心那些衝突到嗎?
作者: newgodddc 時間: 2013-1-18 09:42
GOOD!!!!!感謝分享~
作者: ba0411 時間: 2013-1-21 07:40
本帖最後由 ba0411 於 2013-1-21 07:41 編輯
PhilZ Touch v4.00-b21 釋出
http://forum.xda-developers.com/showthread.php?t=2002953
Completely new Custom Backup and Restore menu
Custom back and restore job list: backup and restore freely any partition combo from old nandroid folder or new custom_backup one
Restore modem as custom modem.img file or modem.bin (found in Samsung tar roms)
Backup EFS in tar (overwrite old backup) + img formats (time stamped)
Restore EFS from either tar or img files
All backup and restore tasks are now built completely on native nandroid functions: no more calling of many shell scripts
One shell script only left to handle raw backup and restore of ext4 partitions (not supported by cwm, I actually use it only for efs.img and restore of modem.bin files)
New Nandroid Settings Menu: improved UI with settings immediately reflecting on menus
New TimeZone menu: friendly UI (idea from TWRP) and simpler code to fix issue where it could sometimes fail to write config file
pigz library: big credits to TWRP team (will be used for new lightning fast compressed backups)
fix ors mount script for phones without external sd
remove useless run of ors mount when not started from boot
fix some partitions could be formatted despite no backup file to restore when md5 check was disabled
small bug fixes and code cleaning
Boeffla-Kernel v2.7-beta2 釋出
http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/viewcategory/4
LED fading support, you now can choose to have fading with "normal" brightness (as stock) or with "bright" brightness (like it was with beta1).
For a demo video of this feature, please klick here (thx to Andreas61 for the video)
(please note: default is off, like stock. you need to enable this either in the boeffla-tweaks app or via the config file).
Please note: For Samsung "apps" like stock sms app or the missed calls thingy it does not fade. Hell knows what Sammy has done here. But with 3rd party apps (whatsapp, sms popup, k9 mail...) it should work fine.
Boeffla-Tweaks app: You can switch between UMS or MTP mode for your external SD card without needing other apps (e.g. UMS Easy...) anymore. Explanation: UMS mode mounts your external sd card via a drive letter to your pc.
Boeffla-Tweaks app: Options under "Others" reordered and slightly renamed.
Lots of internal refactoring in the areas of system tweaks and charging rates (no functionality changes, just being better prepared for the future)
CPU Max Frequency: This now sticks hard to the maximum level (so e.g. when you limit to 1000 MHz, you will not see spikes over this frequency anymore). Only exception: During booting until this setting is applied, all frequencies will be used for some settings. So, reset your counters when you want to check it.
Boeffla-Tweaks app: You can now wipe cache and dalvik cache with a new option under "other". It will reboot automatically afterwards.
Boeffla-Tweaks app: Option to directly reboot into recovery mode (CWM)
Boeffla-Tweaks app: Option to directly reboot into download mode
Boeffla-Tweaks app: Now you can directly flash a new Boeffla-Kernel without using CWM or Odin or mobile Odin. You just place the boeffla-kernel-blablalba.tar.md5 file directly in the root directory of your /sdcard folder. Then you press the option to flash and it will automatically flash and restart your phone.
Important: Make sure you have only one (!) kernel file in this root directory, otherwise nothing will be done.
作者: ba0411 時間: 2013-1-23 13:30
Boeffla-Kernel v2.7-beta3 釋出
http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/viewcategory/4
2.7-beta3 Change Log
Fixed a potential issue in Boeffla-Sound where the partner in a call could not hear you, Boeffla-Sound engine updated to 1.4.4 (thanks to rulala for helping me pinpointing the root cause)
Fixed issues with some broken system tweak settings
LED fading support, you now can choose to have fading with "normal" brightness (as stock) or with "bright" brightness (like it was with beta1).
For a demo video of this feature, please klick here (thx to Andreas61 for the video)
(please note: default is off, like stock. you need to enable this either in the boeffla-tweaks app or via the config file).
Please note: For Samsung "apps" like stock sms app or the missed calls thingy it does not fade. Hell knows what Sammy has done here. But with 3rd party apps (whatsapp, sms popup, k9 mail...) it should work fine.
Boeffla-Tweaks app: You can switch between UMS or MTP mode for your external SD card without needing other apps (e.g. UMS Easy...) anymore. Explanation: UMS mode mounts your external sd card via a drive letter to your pc.
Boeffla-Tweaks app: Options under "Others" reordered and slightly renamed.
Lots of internal refactoring in the areas of system tweaks and charging rates (no functionality changes, just being better prepared for the future)
CPU Max Frequency: This now sticks hard to the maximum level (so e.g. when you limit to 1000 MHz, you will not see spikes over this frequency anymore). Only exception: During booting until this setting is applied, all frequencies will be used for some settings. So, reset your counters when you want to check it.
Boeffla-Tweaks app: You can now wipe cache and dalvik cache with a new option under "other". It will reboot automatically afterwards.
Boeffla-Tweaks app: Option to directly reboot into recovery mode (CWM)
Boeffla-Tweaks app: Option to directly reboot into download mode
Boeffla-Tweaks app: Now you can directly flash a new Boeffla-Kernel without using CWM or Odin or mobile Odin. You just place the boeffla-kernel-blablalba.tar.md5 file directly in the root directory of your /sdcard folder. Then you press the option to flash and it will automatically flash and restart your phone.
Important: Make sure you have only one (!) kernel file in this root directory, otherwise nothing will be done.
作者: aggro1234 時間: 2013-1-23 20:00
讚讚讚讚讚讚讚讚讚讚讚讚
讚讚讚讚讚讚讚讚讚讚
作者: ba0411 時間: 2013-1-26 13:16
Boeffla-Kernel v2.7-beta5 釋出
http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/viewcategory/4
Change log of 2.7-beta5:
Boeffla-Sound engine update to 1.4.7 (fixes all call and eq issues, but MIC_mode is now exclusive, so switch it off again when you want to make calls !!!)
Reimplemented system tweaks refactoring
作者: ba0411 時間: 2013-1-28 07:02
本帖最後由 ba0411 於 2013-1-28 07:12 編輯
Boeffla-Kernel v2.7-beta6 釋出
http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/viewcategory/4
2.7-beta6 Change Log
Boeffla-Sound Engine updated to 1.4.8 (with many fixes for the call-issues in, note: Mic-Mode is now less intelligent and you have to set it back to default before you can do calls again!!!)
Charging level interface replaced by a new version which allows to configure ac and usb rates more independently in the tweaks app + usb charge rate zero (=does not load at all) is now allowed (experimental)
System tweaks fixed for speedmod profile (there was one value missing due to a typo)
作者: shunza00 時間: 2013-1-30 12:21
這東西不知道收下來幾次了~刷瞭其他就又要來找~
作者: 3737007 時間: 2013-1-30 15:09
感謝大師阿.......
手機整個救回來了-/-
作者: ba0411 時間: 2013-2-1 11:26
PhilZ Touch v4.00-b34 釋出
http://forum.xda-developers.com/showthread.php?t=2002953
PhilZ Touch v4.00-b34
- life in color edition
- nandroid backup/restore with gz compression using pigz (multi cpu threading): toggle between low (3), medium (6), high (9) or disabled
- fix when preload toggle was enabled, preload was processed in custom backup even if it is not selected
- complete rewrite of gui settings toggles: new menus display
- new toggle for touch accuracy
- more menu height settings (useful for high res devices)
- more scroll sensitivity settings
- all settings are now saved to a single .ini file you can edit (detailed values will follow)
- possibility to reset all values to defaults, to export and to import them to/from sdcard
- Nandroid Advanced Restore menu now shows that /preload will be processed with /system
- Misc Nandroid Settings now can also be accessed from Nandroid Menu
- add show really progressing bar during nandroid restore operations
- fix pigz as static library
- i9100/n7000 ramdisk: fix getprop hack script (thanks to a3955269)
- big code cleaning and small bug fixes
作者: ba0411 時間: 2013-2-2 12:04
Boeffla-Kernel v2.7-beta8 釋出
http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/viewcategory/4
2.7-beta8 Change Log (vs. 2.6. stable)
Boeffla-Sound Engine updated to 1.4.9 (call issues confirmed to be fixed, note: Mic-Mode is now less intelligent and you have to set it back to default before you can do calls again!!!)
Charging level interface replaced by a new version which allows to configure ac and usb rates more independently in the tweaks app + usb charge rate zero (=does not load at all) is now allowed (experimental)
LED fading support, you now can choose to have fading with "normal" brightness (as stock) or with "bright" brightness (like it was with beta1).
For a demo video of this feature, please klick here (thx to Andreas61 for the video)
(please note: default is off, like stock. you need to enable this either in the boeffla-tweaks app or via the config file).
Please note: For Samsung "apps" like stock sms app or the missed calls thingy it does not fade. Hell knows what Sammy has done here. But with 3rd party apps (whatsapp, sms popup, k9 mail...) it should work fine.
Boeffla-Tweaks app: You can switch between UMS or MTP mode for your external SD card without needing other apps (e.g. UMS Easy...) anymore. Explanation: UMS mode mounts your external sd card via a drive letter to your pc.
Boeffla-Tweaks app: Options under "Others" reordered and slightly renamed.
Boeffla-Tweaks app: You can now wipe cache and dalvik cache with a new option under "other". It will reboot automatically afterwards.
Boeffla-Tweaks app: Option to directly reboot into recovery mode (CWM)
Boeffla-Tweaks app: Option to directly reboot into download mode
Boeffla-Tweaks app: Now you can directly flash a new Boeffla-Kernel without using CWM or Odin or mobile Odin. You just place the boeffla-kernel-blablalba.tar.md5 file directly in the root directory of your /sdcard folder. Then you press the option to flash and it will automatically flash and restart your phone.
Important: Make sure you have only one (!) kernel file in this root directory, otherwise nothing will be done.
Completely refactored system tweak settings (changing the settings in the app requires a reboot now, but this is the cleanest way to not mess up the system)
作者: Kelvin-Ting 時間: 2013-2-4 01:54
感謝大大的分享
作者: hkhim1986 時間: 2013-2-4 12:27
THX..........試試看!
作者: ba0411 時間: 2013-2-4 17:36
PhilZ Touch v4.00-b39 釋出
http://forum.xda-developers.com/showthread.php?t=2002953
New in PhilZ Touch v4.00-b39 (Proper repack)
- custom background image (png in 350x735 pixels)
- toggle background in preset 27 colors
- toggle background icon
- b34 ---> b35:
* fix /preload was always restored during nandroid operations
作者: 家家 時間: 2013-2-5 00:20
本帖最後由 家家 於 2013-2-5 00:24 編輯
ba0411 發表於 2013-2-4 17:36
PhilZ Touch v4.00-b39 釋出
http://forum.xda-developers.com/showthread.php?t=2002953
我刷了S ROM+S PACK6.2不錯用,接著開始試著刷核心,先刷了B核使用一天,有比較省電,但感覺有點當當的,有時還卡住要重開機，後改刷Siyah-1.8.9+順暢度真是順,且開網頁的速度也很爽，真是不錯,用電是比較多一點,但和原廠比起又算什麼呢?現在又看到基頻的問題,又想要再嘗試了漸漸地掉入刷機這條路了,我想問一下,我的基頻是I9300XXELLA是要刷哪個會比較好，可以改變電訊的信號嗎(因遠傳在家中有死角,有時會收不到)不知和這有没有關係,另外可以取消子母視窗嗎?因有時要傳檔案至Dropbox會出現子母視窗不支援的功能,而無法開啓 [attach]501529[/attach] 請問要如何解決
作者: 家家 時間: 2013-2-5 00:47
本帖最後由 家家 於 2013-2-5 02:48 編輯
我想問一下,我的基頻是I9300XXELLA是要刷哪個基頻會比較好，可以改變電訊的信號嗎(因遠傳在家中有死角,有時會收不到)不知和這有没有關係
作者: 家家 時間: 2013-2-5 02:06
本帖最後由 家家 於 2013-2-5 02:48 編輯
我想請問一下，下載這個壓縮檔,裡面包含了很多檔案，我有點不太懂,因我只要刷I9300XXLLA的基頻,一樣是整個刷包放入記憶卡中嗎，那在選 (.刷Modem/基頻
要刷入的檔案(XXXX.zip壓縮檔),就是上面下載下來的檔案嗎
放到內存記憶體內,也可放在外接記憶卡開始操作..
wipe cache →
advanced選單 > wipe dalvik cache →
install zip from sdcard > choose zip from internal sdcaed(external sdcaed)
－選擇「(XXXX.zip壓縮檔)」那裡面包含了那麼都檔,我該樣選擇呢?我怕刷錯,不好意思,有大大可以幫忙嗎
作者: 低調中的高調 時間: 2013-2-5 03:23
照著步驟做就對了...
我都打出來了..
你一定沒有操作過...
作者: 家家 時間: 2013-2-5 03:33
對呀,我還没有操作過,我要先想好,確定一下步驟,怕刷的時候出狀況,我的問題是不了解這個刷包,這裡面好像有很多資料,可我只要刷基頻,因ROM和核心我都有刷了,會不會在選擇時全部都會打開,怕會有沖突,因我不太會用壓縮檔,怕搞錯了,謝謝
作者: ba0411 時間: 2013-2-5 09:32
你可以參考這篇
http://apk.tw/forum.php?mod=redi ... &fromuid=614201
作者: ba0411 時間: 2013-2-5 09:33
基頻可以直接刷入 不用擔心出問題
刷入別選錯檔案就可以了
刷法跟你之前刷機一樣
不過不用再做WIPE 直刷即可
作者: a09262906 時間: 2013-2-5 09:42
Boeffla-Kernel v2.7-beta9 開放測試囉
http://www.boeffla-kernel.de/
Boeffla-Sound Engine updated to 1.4.9 (call issues confirmed to be fixed, note: Mic-Mode is now less intelligent and you have to set it back to default before you can do calls again!!!)
Charging level interface replaced by a new version which allows to configure ac and usb rates more independently in the tweaks app + usb charge rate zero (=does not load at all) is now allowed (experimental)
LED fading support, you now can choose to have fading with "normal" brightness (as stock) or with "bright" brightness (like it was with beta1).
For a demo video of this feature, please klick here (thx to Andreas61 for the video)
(please note: default is off, like stock. you need to enable this either in the boeffla-tweaks app or via the config file).
Please note: For Samsung "apps" like stock sms app or the missed calls thingy it does not fade. Hell knows what Sammy has done here. But with 3rd party apps (whatsapp, sms popup, k9 mail...) it should work fine.
Boeffla-Tweaks app: You can switch between UMS or MTP mode for your external SD card without needing other apps (e.g. UMS Easy...) anymore. Explanation: UMS mode mounts your external sd card via a drive letter to your pc.
Boeffla-Tweaks app: Options under "Others" reordered and slightly renamed.
Boeffla-Tweaks app: You can now wipe cache and dalvik cache with a new option under "other". It will reboot automatically afterwards.
Boeffla-Tweaks app: Option to directly reboot into recovery mode (CWM)
Boeffla-Tweaks app: Option to directly reboot into download mode
Boeffla-Tweaks app: Now you can directly flash a new Boeffla-Kernel without using CWM or Odin or mobile Odin. You just place the boeffla-kernel-blablalba.tar.md5 file directly in the root directory of your /sdcard folder. Then you press the option to flash and it will automatically flash and restart your phone.
Important: Make sure you have only one (!) kernel file in this root directory, otherwise nothing will be done.
Completely refactored system tweak settings (changing the settings in the app requires a reboot now, but this is the cleanest way to not mess up the system)
You can now directly load&flash either the latest stable version or the latest test version in the boeffla tweaks app (easier to upgrade in future)
Dialog windows in many options of boeffla tweaks app are back
CPU max limitation back again, so the CPU will not go over the configured frequency anymore
Internal: Some more logging and debugging removed from some driver
Internal: Some more small optimisations under the hood
作者: ba0411 時間: 2013-2-7 15:54
本帖最後由 ba0411 於 2013-2-8 09:22 編輯
Boeffla-Kernel 2.7.1 正式版 釋出
http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/summary/7/298
Change Log:
NFS is fixed and working now
CIFS and NFS can conveniently be enabled in Boeffla-Tweaks app or config file
Mic-Mode will be reset to default during every boot if it was set to something else in Boeffla-Tweaks App before (security feature, note it does only apply to Tweaks App, nothing else)
作者: a09262906 時間: 2013-2-7 23:56
請問大大們 有更新 Boeffla-Kernel 2.7.1 嗎?
我更新完後 開啟 Boeffla Tseaks 會當機耶@_@
畫面會一直閃黑屏 刷入時有清除核心腳本了...
有人也會這樣嗎? 也有試過2w
作者: a09262906 時間: 2013-2-8 00:19
已經沒問題了 發現是 Boeffla sound 這APP的關係...
把它移除後 重新安裝就沒問題囉
有其他人也這樣的話也可以試試看 :)
作者: ba0411 時間: 2013-2-8 09:20
核心清除腳本已有更新
Kernel_Clean_Script_SGS3_v3.zip
(500.87 KB, 下載次數: 25)
2013-2-8 09:19 上傳
點擊文件名下載附件
作者: allenmai123123 時間: 2013-2-8 14:58
多謝分享........
作者: ba0411 時間: 2013-2-11 10:19
Boeffla-Kernel 2.7.2 釋出
http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/summary/7/304
you can now download the latest stable version 2.7.2 (or get it directly via Boeffla-Tweaks by going on Load&Flash).
There are only some internals changed/reverted, there are NO functional enhancements or changes.
Nevertheless I would encourage you to flash and report back to me how this version runs for you.
PhilZ Touch 4.31 釋出
http://www.mediafire.com/?4z8di9999xz8z1i
http://forum.xda-developers.com/showthread.php?t=2002953
- add slide left to capture a screen shot from any active menu
- Back button now will cancel nandroid backup/restore operations (tar+dedupe) and custom_rom.zip operations
- merge CWM 6.0.2.8 changes (credits to Koush)
- multi-zip flashing from custom set locations
- after installing a new ROM that wipes recovery settings, on next reboot, you are prompted to restore them from a backup if you have done one
- new menus separator lines that you can show/hide, set colors and transparency. Useful for solid color themes, like Black
- fix default menu highlight transparency was set to a wrong default value
- show / hide bottom virtual buttons
- set number of bottom log rows to show
- code optimizing for file checks
- misc code optimizing
- misc compiler warning fixes
作者: ba0411 時間: 2013-2-12 18:46
PhilZ Touch 4.35 釋出
http://www.mediafire.com/?d7g0dmgz8vi1qb6
http://forum.xda-developers.com/showthread.php?t=2002953
Vulnerability fix: setting a fake/corrupted png file as background resulted in a bootloop into recovery
Vulnerability fix: cancel nandroid operations could result in data corruption if user attempted to directly delete backup from menu or forced a reboot
Friendly Log View: toggle during install of zip files (manual, multi, on boot) and forced when Show Log from advanced menu
Pause on show log: Forced in Show Log from advanced menu. Always disabled for multi zip flash and on boot, toggle for manual zip installs
Install zip menu order changed so that install from internal/external are nearby
Move reset / save recovery settings to main PhilZ Settings menu
作者: yubo780429 時間: 2013-2-12 21:30
内核和ROM的搭配才能适用吧
有些ROM用了某些内核反而会不适用
作者: ba0411 時間: 2013-2-13 10:21
Boeffla-Kernel 2.8 beta1 釋出
http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/summary/4/315
Change Log
There are 4 profiles for the PegasusQ governor:
"Boeffla" - this profile tries to stick as long as possible to one core only. If there is lots of additional performance required, additional cores will be activated. On top, the governor scales up a little less agressively, unused cores however are shut down quite aggressively again. Aim is to be more battery friendly than standard pegasusq (to be confirmed by you of course)
"1 core" - limit to use one core as maximum, regardless how much load is on the system
"2 core" - same as 1 core, just with a maximum of 2 used cores
"Speedmod" - these are the pegasusq tweaks hardcore uses in his famous Speedmod kernel
There are 3 profiles for the zzmoove governor (tx to ZaneZam):
"performance" - optimized for higher performance in zzmoove
"optimal" - Good balance between performance and battery life
"battery" - Fokus on better battery life
Note: Currently I have only implemented these profiles via the boeffla-tweaks app. I want to first wait for your feedbacks on the profiles to decide which will finally make it into a stable branch. Of course, the config file way of configuration will then be added as well.
作者: 李宏期 時間: 2013-2-13 11:02
真是神人阿 果然厲害 謝謝大大
作者: ba0411 時間: 2013-2-15 11:37
Boeffla-Kernel 2.8 beta2 釋出
http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/summary/4/332
Change Log (vs 2.8-beta1):
As requested by a few users here, I added another pegasusq profile which is called "boeffla moderate". This profile actives the second core much quicker than the battery saving boeffla profile, hence it is less strict keeping to one core. However, core 3 and 4 will still only be activated when there is high load.
Boeffla tweaks app updated with a newer version that primarily has some internal fixed and increases the text size of the categories to have a slightly better user experience (tx to ZaneZam).
The updated app required some semi-intelligent update handling, which is now implemented to also support subsequent updates of the app in future.
作者: ba0411 時間: 2013-2-22 11:51
PhilZ Touch 4.63 釋出
http://www.mediafire.com/?l9fbptf3nzq3lph
http://forum.xda-developers.com/showthread.php?t=2002953
(Changes from 4.35 ----> 4.63)
fix user background image was not restored on restart
TWRP backup and restore support, include full md5 sum support (single and multivolume, compressed and non compressed formats)
support multiple efs backups in tar format (user request)
now it is possible to restore from many modem.bin files under clockworkmod/custom_backup/.modem_bin folder to flash them (just name them *.bin)
fix potential md5 error caused when restoring/flashing some modem.bin files
fix recovery partition was restored when ever you restore something in stock Advanced Restore Menu
custom restore option to browse from /sdcard/0 if it exists (this is a temporary workaround for Android 4.2)
add ext4 support for mounting external storage (i9300 thread request)
friendly log mode now is final: logs are no more wiped when switching view for all operations (install zip, boot scripts, backup/restore...)
enhance logging and user messages mainly in backup/restore operations
remove useless support for browsable custom aromafm.zip folders (must be in default folder)
Clean Phone for a New ROM moved to Custom Backup and Restore
preview support for slide right and double tap gesture actions
fix: virtual keys will no more trigger an action at end of your scrolling if touched by case
fix: virtual keys could remain highlighted under some circumstances
fix screen capture index was back to 11 when it reached 100 (now it will be 999 photos and reverts to 001)
fix: toggle background icon prompted for a key since v4.53
fix: when toggle icon, screen logs are no more wiped
fix: when change menu size, screen logs no more wiped
deep revise of touch source to optimize and clean code (scrolling behavior is still same, this will be the next on my todo list)
many bugfixes + compiler warnings fix in code
作者: ba0411 時間: 2013-2-24 11:16
Boeffla-Kernel 2.8 beta3 釋出
http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/summary/4/334
Change Log (vs. last stable version 2.7.2):
"Soft" overclocking up to 1500 or 1600 MHz available
Boeffla-Sound Engine updated to 1.5.1:
Speaker tuning
Microphone sensivity level can be configured in 32 steps separately for recording and calls (call detection is back in the engine now)
Mic mode is not available anymore as it got replaced by the Microphone sensivity level just explained
New zzmoove governor version 0.3 (All credits to ZaneZam!!!)
5 PegasusQ profiles (boeffla battery, boeffla moderat, 1core, 2cores, smod)
3 zzmoove profiles (battery, optimal, performance)
"peg" system tweak removed, this is now contained in the pegasusq profile "smod" (all using "smod" in system tweaks before should also select "PegasusQ Speedmod" now additionally, users of system tweak "peg" now choose stock for system tweaks and "pegasusq speedmod" for governor to have the same behaviour)
Boeffla Tweaks app now installed as user app instead of system app (this fixes the issue with app not showing up after first reboot).
作者: ba0411 時間: 2013-2-26 14:22
Boeffla-Kernel 2.8 beta3a 釋出
http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/summary/4/338
Hi all,
just a quick information: If you face issues with applying your configured governors in boeffla-tweaks, there is a fixed version 2.8-beta3a available now for download via the homepage or load&flash via boeffla-tweaks app.
That was the only quick fix, nothing else is contained.
作者: ba0411 時間: 2013-2-27 12:12
Boeffla-Kernel 2.8 beta4 釋出
http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/summary/4/340
2.8-beta4
Change Log (vs. last stable version 2.7.2):
"Soft" CPU overclocking up to 1500 or 1600 MHz available
GPU overclocking in two steps (260-533 and 350-600 MHz) available (the gpu undervolting implementation has been also redesigned "under the hood" to support the more dynamic voltages required by the OC feature)
Boeffla-Sound Engine updated to 1.6.0:
Speaker tuning available
Stereo expansion available
Mono downmix available
Microphone sensivity level can be configured in 32 steps separately for recording and calls (call detection is back in the engine now)
Mic mode is not available anymore as it got replaced by the Microphone sensivity level just explained
New zzmoove governor version 0.3 (All credits to ZaneZam!!!)
5 PegasusQ profiles (boeffla battery, boeffla moderat, 1core, 2cores, smod)
3 zzmoove profiles (battery, optimal, performance)
"peg" system tweak removed, this is now contained in the pegasusq profile "smod" (all using "smod" in system tweaks before should also select "PegasusQ Speedmod" now additionally, users of system tweak "peg" now choose stock for system tweaks and "pegasusq speedmod" for governor to have the same behaviour)
Boeffla Tweaks app now installed as user app instead of system app (this fixes the issue with app not showing up after first reboot).
Small note: So far Simone could not yet update the Boeffla-Sound app in playstore. So the new features can currently only be used by using the Boeffla-Tweaks app directly, or of course the config file.
作者: aus 時間: 2013-2-27 12:38
請問ba大，我現在是2.7.2，您建議升上去嗎？(即使是beta版？)
您也都會跟進嗎？
作者: ba0411 時間: 2013-2-27 20:12
我是都會跟進耶
去玩新東西
反正覺得不好用再刷回2.7.2就好了
不過目前b4版用挺好的 =__=
作者: ba0411 時間: 2013-2-28 11:25
本帖最後由 ba0411 於 2013-2-28 15:51 編輯
Boeffla-Kernel 2.8 beta5a 釋出
http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/summary/4/342
2.8-beta5a
The following small issues which have been reported for beta5 have been fixed:
- Speaker tuning settings accidentally moved into speaker volume settings as well
- boeffla-kernel folder creation in Boeffla-Tweaks app with wrong access rights
作者: austin0926171 時間: 2013-3-2 17:53
目前是最新版的，太感謝了~~
作者: yuchen1681 時間: 2013-3-2 20:16
大大提供的檔案~~小弟不會用呀~~解壓後一堆資料夾
拜託!!教一下~
作者: aus 時間: 2013-3-2 20:26
你確定你有爬文嗎??
版大發了好幾篇教學文,你有看過嗎??
作者: ba0411 時間: 2013-3-2 22:07
Boeffla-Kernel 2.8 正式版 釋出
http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/summary/7/344
Note: This kernel is only for Samsung based Jelly Bean (Android 4.1.x) roms!!! Do not install it on CM or AOSP based roms!!! And do not install on latest Samsung 4.2 leaks !!!
Features:
* Soft CPU overclocking to 1500 or 1600 MHz
* Governor profiles for pegasusq and zzmoove for performance, battery saving etc.
* GPU overclocking up to 700 MHz
* GPU undervolting / overvolting
* Boeffla-Tweaks app to configure most important kernel features via easy user interface (many features added with kernel 2.8)
* Configuration file for easy configuration of kernel without additional apps for many options
* Compatibility to common standard apps (Voltage Control, SetCPU, System tuner etc.)
* Boeffla-Sound engine V1.6.0 to unleash the power of the Galaxy S3 audio chip (latest new functionalities: speaker tuning, intelligent microphone sensitivity setting for both recording and call, call-detection, stereo expansion, mono downmix)
* Full configuration of Boeffla-Sound engine via Boeffla-Sound app from Google playstore possible
* Custom equalizer support via configuration file possible
* LED fading can be enabled (for a demonstration video CLICK HERE - thanks to Andreas61 for recording the video) - Note: It does only work for non-Samsung apps (does not work for missed calls, stock sms etc!)
* Increase brightness of notification LED for both blinking or fading
* Exynos vulnerability fixed
* Sudden death issue supposed to be fixed
* Custom boot animation support
* CRT-OFF animation supported
* CPU undervolting interface
* Adjustable charger rate, defaults increased to 1100 mA for ac (usb stays on 475 mA per default) - you can now set USB charge down to zero, so it does not load when you plug it into your PC to just transfer files etc.
* Hardcore speedmod sharpness fix implemented (default is off, you have to enable it in the config file)
* Touch boost switchable (default is on)
* Black crush fix for better balanced display
* SD card read ahead buffer increased to 256kb (can be disabled)
* Ext4 File system tweaks (can be disabled)
* System Tweaks (Boeffla-Kernel tweaks is default, can be disabled or switched to Speedmod tweaks)
* SIO scheduler (with slight tweaks)
* ROW scheduler
* BFQ scheduler (version v5r1)
* ZZmoove 0.3 governor (focus on battery performance)
* LulzactiveQ governor included (tweaked)
* Dynamic fsync implemented
* Timeouts for external SD card changed to improve handling of crappy cards
* Proportional rate reduction TCP implemented
* Entropy generator for random data fixed
* Car dock support
* Swap support
* init.d support (automatic folder creation and permissions setting)
* CIFS compiled as a module (load module from /lib/modues if required)
* NFS compiled as a module (load module from /lib/modues if required)
* Auto Root (disabled by default)
* exFat supported
* Triangle away supported
* Automatic EFS backup to external (priority) or internal SD Card (fallback)
* Kernel initialisation log file (with history of 3 log files)
* Disabled Android logger (can be enabled again)
* Disabled Kernel logging (can be enabled again)
* Disabled various debug logs and traces
* Compiled with stock ARM toolchain
* Internal kernel busybox version 1.20.2
* Ramdisk from XXELLA firmware
* Source code base is GT-I9300_JB_Opensource_Update7
作者: yuchen1681 時間: 2013-3-3 10:21
哈!!感謝大大~~突然間我就入成功了~~原來是要開起手機裡CWM的程式(已ROOT)，再載入檔案.ZIP
但~~~刷完後~~介面好像還是一樣
還在測試中
先說聲~~謝謝啦
作者: ba0411 時間: 2013-3-3 10:44
這篇教學 給你參考一下吧
http://dingdingc.blogspot.tw/2012/12/galaxy-s-iii-boeffla-kernel.html
作者: ba0411 時間: 2013-3-4 11:37
PhilZ Touch 4.87 釋出
http://www.mediafire.com/?p1er6etx7unk3b2
http://forum.xda-developers.com/showthread.php?t=2002953
New in PhilZ Touch v4.87
v4.63 ---> 4.64
fix: when disabled, virtual keys would still show for a fraction of a second on start
v4.64 ---> 4.87
Backup and Restore:
menu Custom Backup and Restore can now be accessed in main Backup and Restore menu
support restore backups from /sdcard/0 (Android 4.2) in custom jobs and TWRP mode
add support to sd-ext ext4 partition on external storage
menu to delete custom and TWRP backup images
auto-reboot option for custom backup and restore jobs
set .android_secure path in custom jobs
smart auto detect android_secure for stock CWM backup and restore operations
fix preload was selectable in TWRP jobs (even if would not actually be processed)
progress bar is no more overwritten by text
time and battery stats are shown and refreshed during nandroid operations
on successful or cancelled nandroid jobs, user background icon is restored
on cancelled nandroid jobs, progress bar is correctly reset and user background icon is restored
User configurable gesture actions
gestures: double tap, long press/move, long press/lift, slide left, slide right
always vibrate on long press/move action validation
actions: show log, change brightness, blank screen, capture screen shot, launch Aroma File Manager
GUI
default black theme without background icon
toggle clock and battery on top
header title will be auto-shortened to not overwrite battery and clock on lower res devices
battery and clock will truly refresh indications every 15 sec
user configurable dim screen timer
user configurable turn-off screen timer
manually adjust brightness (stock kernel doesn't support lower than 65, but recovery binary will accept 25 on custom kernels)
when double tap mode is selected, you now really need to double tap the same menu to validate it
menu Set Time Zone moved to GUI settings
fix Moscow UTC time
Misc
add support to sd-ext ext4 partition on external storage
Move Clean before instal new ROM menu to Wipe Data/Factory Reset menu
fix /system was left again mounted after start up and showing log
作者: ba0411 時間: 2013-3-4 16:02
本帖最後由 ba0411 於 2013-3-6 13:56 編輯
Boeffla-Kernel 2.9 beta1 釋出
http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/summary/4/346
2.9-beta1
Change Log (vs last stable 2.8)
Completely created from scratch based on latest Samsung source code drop Update8
Ramdisk updated to latest version
SuperSu updated to latest version 1.25
All functionalities of lastest stable 2.8 contained
exFat is working as well now
Boeffla-Kernel 2.9-beta1 更新內容
更新Samsung Update8最新資源
Ramdisk最新資源
SuperSu更新至1.25
完整移植2.8穩定版所有功能
exFat格式確定正常支援
作者: shunza00 時間: 2013-3-4 23:03
收下N次回復N次
作者: shunza00 時間: 2013-3-4 23:20
感謝~但我還是要回覆灌水賺碎鑽才能再次收下~
我盡然被一個新版主抓幾百年前回覆文章說灌水~
APK都快沒人了還這樣玩~XD~
別這們高調怕人不知道你變版主~謝謝~
作者: ba0411 時間: 2013-3-7 21:42
本帖最後由 ba0411 於 2013-3-8 15:12 編輯
Boeffla-Kernel 2.9 beta2a 釋出
http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/summary/4/348
2.9-beta2
Change Log (compared to latest stable version 2.8)
All functionalities of stable 2.8 are contained
New: Completely built from scratch again based on latest Samsung source code drop Update8
New: BFQ scheduler updated from version 5.1 to 6.0
New: Users that do NOT use an exFat formatted storage can disable loading the proprietory exFat dirvers completely (via Tweaks App or Config file) to save some memory and maybe some CPU cycles. If you have exFat in use currently, the app displays a strong warning to you to make you aware it might not be a good idea for you
New: If you overclock your GPU, a dialog will inform you that you might consider some overvolting for stability
New: The clean init.d function in the tweaks app now creates a backup archive with all the removed scripts
New: The debug info file name contains a time stamp now
New: When using the "load&flash" function in the tweaks app, the kernel image does not get deleted anymore after the flash. So you can archive it, store it somewhere, and even flash again via mobile Odin if you like.
New: New folder boeffla-kernel-data introduced: This folder will now contain things like the efs backup, the debug info files, the backup archive for the init.d cleanup, and the boot.img kernel file after load&flash. Now these files do not mess up your root directory on your sd card anymore.
New: Addition script packs for the boeffla-tweaks app are now also installed into this new boeffla-kernel-data folder, older script packs automatically get migrated there (please be patient after first reboot, it can take a short while before it shows up in the tweaks app).
New: Version control for the boeffla-tweaks app is now completely rewritten to be more robust
New: Samsung ram disk updated to latest version
New: SuperSu updated to latest version 1.25
Fix: Charging rates are now showing up in the debug info file again
Fix: last_kmsg log is generated again if kernel logging is enabled (was broken since 2.7)
By the way - this beta defines the scope now for the next 2.9 stable release. Unless you find severe bugs in beta2, I plan to release 2.9 stable by the end of next weekend. Let's see.
Then finally I will start working on my own kernel configuration app. Which fits quite nice for the versioning, this would for sure justify a jump to version 3.0 then.
作者: ba0411 時間: 2013-3-8 13:10
PhilZ Touch 4.87.6 釋出
http://www.mediafire.com/?7n11iwa25xgdjr8
http://forum.xda-developers.com/showthread.php?t=2002953
New in PhilZ Touch v4.87.6
Full change log in below posts
fix: show progress during TWRP backup and restore
auto dim screen on timeout supported during backup and restore operations
fix header menu could overlap battery stats if they are at 100%
fix: restore custom rom zip failed because of left debug code
fix: build custom rom zip from existing ROM would fail to restore if backup format was compressed
huge performance optimize when building custom rom .zip from existing ROM (only backup needed partitions)
fix useless edify incompatible code in custom rom .zip (alpha 06 files)
show compatible phone variants in About
作者: ba0411 時間: 2013-3-11 19:07
Boeffla-Kernel 2.9 beta3 釋出
http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/summary/4/350
Following changes are in beta3:
Boeffla-Tweaks app installation hopefully fixed now
Kernel log files are now stored into boeffla-kernel-data folder as well, not in the configuration file folder anymore
Fixed a wrong voltage setting of a regulator buck
作者: steve0294 時間: 2013-3-11 22:44
請問我已經刷了dingdingc大最新的s rom和s pack
可是原本root後的app裡,圖形是齒輪的那個cwm不見了
那請教大大我可否直接再刷您提供的這個PhilZ Touch CWM 4.87
目前只略懂皮毛所以還不了解很多東西,已盡力爬文了,謝謝
作者: ba0411 時間: 2013-3-12 10:53
cwm那個不影響
那個以前Ding大的rom也有
不過他拿掉了
你如果有刷最新版rom跟pack
裡面就已有包含PhilZ Touch
不用再多刷了 @@
作者: ba0411 時間: 2013-3-13 11:57
PhilZ Touch 4.88.1 釋出
http://www.mediafire.com/?od2jeed4jxy7hfn
原文：http://forum.xda-developers.com/showthread.php?t=2002953
ew in PhilZ Touch v4.88.1
Full change log in below posts
migrate from cm10 to new cm10.1 source
fix fs_type2 is fs_type to maintain ext4 external storage compatibility with fs_type2 entry
fix redefined MACRO for ITEM_APPLY_SDCARD
merge cmw 6.0.2.9 changes (version change only: ignored cwm commit: block google music cache from nandroid operations)
fix: data partition was always restored in Advanced Restore menu
in custom jobs: possibility to disable .android_secure from restore/backup as per TWRP/ors specs
option to auto-restore recovery settings without a prompt screen on reboot
ors support: fill ORS official specifications and more:
- optimize on boot check for openrecoveryscript command file
- add ors support for backup options: selected partitions, compression and md5 toggle
- fix: as per ors specifications, ors will now restore standard partitions when no options are set in script
- ors restore now supports TWRP and PhilZ Touch custom backup path
- ors-mount.sh: better support for path conversion from main system to recovery mount points
- ors backup target volume can be set by user in nandroid settings
- misc ors log fixes for special partitions ignored in cwm
作者: ba0411 時間: 2013-3-15 11:21
PhilZ Touch 4.88.5 釋出
http://www.mediafire.com/file/d4l93ru83mrc07u/philz_touch_4.88.5-i9300.zip
原文：http://forum.xda-developers.com/showthread.php?t=2002953
New in PhilZ Touch v4.88.5
Full change log in below posts
toggle menus are now formatted to device screen width (right align menu option)
add 30mn timezone offset
fix: check if folder already exists before an ors backup job is started
merge CM 10.1 commit: Fix segfault with dead symlinks in char** gather_files()
add extra check for carriage return for get_rom_name function: ensures windobe noobs do not get stuck
作者: ba0411 時間: 2013-3-18 10:58
本帖最後由 ba0411 於 2013-3-21 01:15 編輯
Boeffla-Kernel 2.9 正式版 釋出
http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/summary/7/352
原文：http://forum.xda-developers.com/showthread.php?t=1964572
Note: This kernel is only for Samsung based Jelly Bean (Android 4.1.x) roms!!! Do not install it on CM or AOSP based roms!!! And do not install on latest Samsung 4.2 leaks !!!
Features:
* Soft CPU overclocking to 1500 or 1600 MHz
* Governor profiles for pegasusq and zzmoove for performance, battery saving etc.
* GPU frequencies configurable (underclocking, overclocking up to 700 MHz)
* GPU voltages configurable (undervolting, overvolting)
* Boeffla-Tweaks app to configure most important kernel features via easy user interface
* Configuration file for easy configuration of kernel without additional apps for many options
* Compatibility to common standard apps (Voltage Control, SetCPU, System tuner etc.)
* Boeffla-Sound engine V1.6.0 to unleash the power of the Galaxy S3 audio chip (latest new functionalities: speaker tuning, intelligent microphone sensitivity setting for both recording and call, call-detection, stereo expansion, mono downmix)
* Full configuration of Boeffla-Sound engine via Boeffla-Sound app from Google playstore possible
* Custom equalizer support via configuration file possible
* LED fading can be enabled (for a demonstration video CLICK HERE - thanks to Andreas61 for recording the video) - Note: It does only work for non-Samsung apps (does not work for missed calls, stock sms etc!)
* Increase brightness of notification LED for both blinking or fading
* Exynos vulnerability fixed
* Sudden death issue supposed to be fixed
* Custom boot animation support
* CRT-OFF animation supported
* CPU undervolting interface
* Adjustable charger rate, defaults increased to 1100 mA for ac (usb stays on 475 mA per default) - you can now set USB charge down to zero, so it does not load when you plug it into your PC to just transfer files etc.
* Hardcore speedmod sharpness fix implemented (default is off, you have to enable it in the config file)
* Touch boost switchable (default is on)
* Black crush fix for better balanced display
* SD card read ahead buffer increased to 256kb (can be disabled)
* Ext4 File system tweaks (can be disabled)
* System Tweaks (Boeffla-Kernel tweaks is default, can be disabled or switched to Speedmod tweaks)
* SIO scheduler (with slight tweaks)
* ROW scheduler
* BFQ scheduler (version v5r1)
* ZZmoove 0.3 governor (focus on battery performance)
* LulzactiveQ governor included (tweaked)
* Dynamic fsync implemented
* Timeouts for external SD card changed to improve handling of crappy cards
* Proportional rate reduction TCP implemented
* Entropy generator for random data fixed
* Car dock support
* Swap support
* init.d support (automatic folder creation and permissions setting)
* CIFS compiled as a module (load module from /lib/modues if required)
* NFS compiled as a module (load module from /lib/modues if required)
* Auto Root (disabled by default)
* exFat support switchable (switch it off if you do not need it)
* Triangle away supported
* Automatic EFS backup to external (priority) or internal SD Card (fallback)
* Kernel initialisation log file (with history of 3 log files)
* Disabled Android logger (can be enabled again)
* Disabled Kernel logging (can be enabled again)
* Disabled various debug logs and traces
* Compiled with stock ARM toolchain
* Internal kernel busybox version 1.20.2
* Ramdisk from XXEMR2 firmware
* Source code base is GT-I9300_JB_Opensource_Update8
作者: amam321123 時間: 2013-3-18 21:41
我有問題 要換核心
是直接刷清核包 在馬上刷要核心的就可以是嗎?
會不會影響到當前的rom呢？
作者: amam321123 時間: 2013-3-19 01:53
ba0411 發表於 2013-3-18 10:58
Boeffla-Kernel 2.9 正式版 釋出
http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/summary/7/ ...
低調大好久沒有幫他的刷包更新了
作者: ba0411 時間: 2013-3-19 16:15
先刷核心腳本清除
刷完接著刷入新核心
rom不會被影響
作者: amam321123 時間: 2013-3-19 20:12
會附tweaks讓我們設定嗎@@？
| 歡迎光臨 Android 台灣中文網 (https://apk.tw/) | Powered by Discuz! X3.1 |