網路上最新的 S3 Jellybean 4.1.2

加好友 · 發表於 2012-10-21 13:26

馬上加入Android 台灣中文網，立即免費下載應用遊戲。

您需要登錄才可以下載或查看，沒有帳號？註冊

x

網路上最新的 S3 Jellybean 4.1.2 (個人還沒研究好...不敢刷, 只是與大家分享~)

登錄/註冊後可看大圖

android-jelly-bean.jpg (29.47 KB, 下載次數: 3)

下載附件保存到相冊

2012-10-21 13:25 上傳

XDA developer bajee11 posted a Root Box Android 4.1.2 ROM update for the Galaxy S3 model GT-I9300.
[ROM][4.1.2][AOKP/CM] GT-I9300 Vanilla RootBox [10/10][v2.9]

http://androidadvices.com/update-galaxy-s3-gt-i9300-root-box-jellybean-412-firmware/2/

How to Update Galaxy S3 GT I9300 with Root Box Jellybean 4.1.2 Firmware

Procedure to Update Galaxy S3 GT I9300 with Jellybean 4.1.2 Firmware:
Download the Root Box Jellybean 4.1.2 Custom ROM Firmware and Google APPS Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the 2 downloaded zip files in your device.
Disconnect the device from computer and turn off your Galaxy S3 so that it can be entered in the recovery mode. Recovery mode in Galaxy S3 GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.
In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

Select “install zip from sd card” > “choose zip from internal sd card” and then choose the Root Box Jellybean 4.1.2 Custom ROM Firmware and Google APPS Package which you have placed in your phone. It will take around 4 -5 minutes for applying the update.
Once the update is applied, select the option of “Go Back” and “Reboot System now” for rebooting the device in the normal mode. Since it’s a first reboot, it will take more time than the normal mode as it has to finalize all the apps etc.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.
.
Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go you have now successfully learnt on how you can upgrade your Galaxy S3 GT I9300 with the latest Root Box Jellybean 4.1.2 Firmware.

加好友 · 發表於 2012-11-4 20:13

4.1.1後來個4.1.2，一頭霧水，好怪
謝大大分享

加好友 · 發表於 2012-11-4 19:27

恩.....有看沒有懂！！
還好有翻譯機....好像是個好東西
感謝大大分享

加好友 · 發表於 2012-11-4 19:23

恩.....有看沒有懂！！
還好有翻譯機....好像是個好東西
感謝大大分享

加好友 · 發表於 2012-11-3 21:42

大大是否已刷？

加好友 · 發表於 2012-10-26 13:44

4.1台灣都沒有正式就有 4.1.2

加好友 · 發表於 2012-10-22 15:00

後來因為 mobile01 Danny 大大也做了一個 XXDLJ1, 所以我就沒刷UK了...
分數/ 耗電對我來說都還不錯, 如下給大家參考.
(這個ROM 就不在這裡多說了, 請自行爬文囉!)

登錄/註冊後可看大圖

加好友 · 發表於 2012-10-21 23:46

個人發現的問題
1.wifi網路無法分享

2.照相功能前後鏡頭轉換很慢

加好友 · 發表於 2012-10-21 23:04

各位大大, 真是抱歉! 只是跟各位分享一下...
個人看法只能說別刷了... 我 download 下來152.78MB... 小的怪...
但是手癢還是刷了(based on 我的 DLIB 刷的)... 非常陽春, 截圖我也操作不出來...

我現在要先刷回 UK Build Date 10/8 的 GT-I9300_H3G_1_20121009231521
如果好再跟各位大大分享囉!

加好友 · 發表於 2012-10-21 23:04

簡單的說就是下載完他講的兩個ZIP檔然後刷就好了剛試了一下感覺還OK
可是沒有繁體中文嗎囧

[ROM] 網路上最新的 S3 Jellybean 4.1.2

馬上加入Android 台灣中文網，立即免費下載應用遊戲。

相關帖子

評分

瀏覽過的版塊

警告：您的Adblck已啟用