Android 台灣中文網

標題: HTC EVO 3D 1.53.0007 S-ON 解鎖S-OFF並且降級到1.49.9999教學~ [打印本頁]

---

作者: D214002001    時間: 2012-7-18 16:53
標題: HTC EVO 3D 1.53.0007 S-ON 解鎖S-OFF並且降級到1.49.9999教學~


HBOOT1.53.0007解鎖文教學 s-on適用~怕大家看不懂XDA上的方法我就弄個教學^^

1_Unlock bootloader from htcdev  必須去htcdev使用官方解鎖到Unlock這裡有教學文~
http://www.market.com.tw/showthread.php?170-HTC-EVO-3D-(GSM)-Unlocked-Recovery-Rooted
2.flash Leedroid GB ROM from recovery http://leedroid.ftp.rshost.eu/Shoote...4-Final-GB.zip(Don\\\'t forget to wipe data/factory reset and wipe cache + dalvik)
刷寫Leedroid GB ROM 到手機裡別忘記(Don\\\'t forget to wipe data/factory reset and wipe cache + dalvik),手機無法開機進入系統沒關西~
3.go back to fastboot就是進入HBOOT裡的fastboot USB 手機要接上USB
4.download http://unlimited.io/content/files/Co...r_u_GB_WIN.zip下載S-OFF工具ControlBearRelease_shooter_u_GB_WIN
5.copy adb, fastboot and AdbWinApi.dll to were you extracted the zip file復製adb.exe,fastboot和AdbWinApi.dll
到你的電腦X:\\\\上
6.go to fastboot and type:
fastboot flash boot jb_boot.img
fastboot reboot  
手機接上USB進入fastboot USB然後在cmd.exe打上這上面2段英文
7.make sure to uninstall htc sync and battery to be at least 75%電腦必須移除HTC sync電池必須75%或以上
8.after the restart you will see a screen called JupunutBear從新開機進入系統會看到螢幕顯示JupunutBear特殊介面
9.run controlbear.exe as administrator 以系統管理員執行身分執行controlbear.exe~手機都要一直保持接著USB線喔!
10.it will say Segmentation fault /system/bin/su -...沒意外的話會出現Segmentation fault /system/bin/su -...
11.接著按ENTER退出controlbear.exe進入cmd.exe打上adb reboot recovery手機會從新啟動進入recovery
12.install su-2.3.6.3-efgh-signed.zip from recovery http://www.thedroiddemos.com/downloa...fgh-signed.zip no worries if you see an error 下載su-2.3.6.3-efgh-signed並且用recovery刷入手機
13.reboot從新開機一樣要顯示JupunutBear特殊介面
14.在次以系統管理員執行身分執行controlbear.exe
15.you will still see this error No Juopunutbear boot image found 你將會看到這個錯誤No Juopunutbear boot image found 然後退出程式
16.在cmd.exe直接打上 adb push jb_boot.img /data/local/tmp/
17.re run controlbear.exe as administrator(No more errors)從新以系統管理員執行身分執行controlbear.exe不會有出現任何錯誤
18.接下來是重點了 \\\"Do not remove sdcard from phone\\\" \\\"Do wire-trick now!! Look instructions at web\\\"出現這2段請用自製電線或鐵線接手機~開始短接，你就按一定節奏觸碰SD卡槽外殼，當聽到電腦有插拔硬體的聲音時立即停止；如果你看到以下提示：
Waiting device....                           
Rebooting device
Please wait....
Found device... Please wait...
Getting into bar.....
Raising Glass
SUCCESS - Taking a sip.
SUCCESS - Beer is tasty.
SUCCESS - Beer is tasty.
SUCCESS - Beer is tasty.
SUCCESS - Beer is tasty.
SUCCESS - Buddies and Beer
Checking alcohol level.......            
19.if you see error code 66732337 then your time when using the wire wasn\\\'t correct, re open controlbear.exe as administrator and try again如果出現66732337錯誤代碼請從17步驟在一遍應該就沒問題
20.after you time the wire trick correctly it will ask you if you want to s-off the phone(In controlbear.exe) type y for yes 之後在controlbear.exe程式上會顯示要你按N/Y請選Y
21.Well done!!!! s-off 恭喜您~成功降級到1.49.999並且s-off!!線接法如下圖:
成功後如圖顯示

登錄/註冊後可看大圖