【 S3台灣原廠韌體(ROM) 】 - 2013/7/4更新至MF1 (4.1.2)

載點已死

再找原廠ROM,
真的太好了!!
感謝分享,

謝謝  我正在學習中~~~

好清楚！謝謝版大

載點全部都失效了  麻煩版主檢查看看 謝謝

為甚麼我點連接我不知道要去哪案下載? 還是要註冊呢?
不好意思我是菜鳥很白癡請見諒T_T

太實用了..感謝分享

好清楚！謝謝版大

<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> boot.img
<ID:0/011> NAND Write Start!!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
我的出現這畫面，然後線刷軟體出現FAIL

<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300ZSEMK3_I9300OZSEMK3_1042642_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> boot.img
<ID:0/011> NAND Write Start!!
<ID:0/011> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)

我的最後結果是FAIL，有誰能幫我?